1.
The Meshing Mechanism and Dynamic Analysis of Composite Profile Silent Chain Sprocket;
复合齿廓齿形链链轮的啮合机理及动态分析
2.
The method of calculating gear wheel flank profile falling-at the initiation point
齿廓啮合起始点计算及测量齿轮参数设计
3.
Study on the Mesh Characteristic of a Cycloidal Gear Pump
一种摆线类齿轮泵转子齿廓的啮合特性研究
4.
Swing Movable Tooth Drive Mechanism with Double External(Double Internal) Tooth Profile
双外齿廓(双内齿廓)摆动活齿传动机构
5.
The contours of the sprocket teeth are medium frequency induction hardened. All transmission clutches are of involute spline type.
链轮齿廓经中频淬火。所有换挡离合器均为渐开线花键齿式离合器。
6.
Exeperience in partial alar defect repair by bilateral composite grafts from the ear.
应用双侧耳廓复合组织修复鼻翼缺损
7.
AURICULAR COMPOSITE GRAFT IN REPAIR OF NASAL ALAR DEFECTS
耳廓复合组织游离移植修复鼻翼缺损
8.
Embedding Transplantation of Auricular Composite Graft in Repair of Alaenasi Defect
耳廓复合组织嵌入移植修复鼻翼缺损
9.
Transmission Error and Noise Experiment on Meshing of the Straight Profiled Internal Gear with the Involute External Gear
直廓内齿与渐开线齿轮啮合传动计算与噪声试验
10.
Basic tooth profile of straight and skew bevel gears
GB/T12369-1990直齿及斜齿锥齿轮基本齿廓
11.
working flank radius
齿廓工作段圆弧半径
12.
A study on the friction force between the gears and its effect;
浅析齿轮齿间摩擦力及其对轮齿齿廓的影响
13.
Edge Detection and Curvefitting of Textile Structural Composites;
三维编织复合材料二维截面的轮廓提取与拟合
14.
ANSYS Workbench Based on Compound Gear Pump Meshing Gear Finite Element Analysis
基于ANSYS Workbench的复合齿轮泵啮合齿轮有限元分析
15.
The affect of machining error on the mesh inside of small tooth number difference of the tooth outline overlap interference is studied in this paper, with the application of practical examples, and the corresponding solving methods are given.
应用具体实例,研究了加工误差对少齿差内啮合齿廓重迭干涉的影响,并提出相应的解决方法。
16.
Basic rack tooth profile of involute cylindrical gears
GB/T1356-1988淅开线圆柱齿轮基本齿廓
17.
Basic rack tooth profile of fine-pitch bevel gears
GB/T10224-1988小模数锥齿轮基本齿廓
18.
Double-circular-arc tooth profile of basic rack for cylindrical gears
GB/T12759-1991双圆弧圆柱齿轮基本齿廓