1.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
刀尖圆弧半径补偿在内外径车削加工中的应用
2.
reducing extension piece
异径内外螺纹管接头
3.
Washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的垫圈或垫片。
4.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
5.
The male and female joint confines the gasket O.D and I.D.
这种外螺纹和内螺纹连接限制了垫圈的外径和内径。
6.
The system design variables are magnet external diameter of internal ring, internal diameter of external ring, depth of groove - ring and ampere turns.
系统设计变量为磁铁内环外径、外环内径、槽口深度和安匝数。
7.
Top view of spring lock washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈的俯视图。
8.
Top view of washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的垫圈或垫片的俯视图。
9.
Cost-Effective Analysis of Domestic and Overseas IPO Path;
境内外IPO路径选择的成本收益分析
10.
Discussion on the Development and Research of the Technology of Large Diameter Hi-quality HFW Pipe in Abroad and Domestic
国内外大中直径HFW焊管工艺发展研究
11.
CFD analysis on effects of impeller outlet diameter on flow field in centrifugal pump
叶轮外径对离心泵内流影响的CFD分析
12.
External Effects of Employing Foreign Players and Its Internalization Approach;
外员使用的外部效应及其内在化途径研究
13.
Drag onto the page to add washer or spacer with adjustable inside and outside diameters.
拖到绘图页后，可以添加内径和外径都可调整的垫圈或垫片。
14.
Chamfered washer or spacer with adjustable inside and outside diameters and chamfer.
内径和外径以及斜面都可调整的切角垫圈或垫片。
15.
Top view of chamfered washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的有切角的垫圈或垫片的俯视图。
16.
The initial inner diameter of the outer cylinder was 59mm, giving a shrinkage allowane of 1.5% .
外圆筒的初始内径为59毫米，收缩裕度为1．5％．
17.
The initial inner diameter of the outer cylinder was 59 mm, giving a shrinkage allowance of 1.5% .
外圆筒的初始内径为59毫米，热套裕度为1．5％。
18.
Extraction of cavernous angioma in orbit muscle conus by skin-conjunctiva path.
外眦皮肤结膜径路摘除眶肌锥内海绵状血管瘤