1.
Install the hydraulic valve tappets.
安装液压气门挺杆。
2.
Valve Lash Adjuster
气门间隙调节器又称液压挺杆
3.
valve-tappet clearance adjuster
气门挺杆间隙调节器
4.
tappet oil gallery
(气门) 挺杆润滑油道
5.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
6.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
7.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
8.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"
9.
Slide Hydraulic Tappet Remover/Installer Tool C-4129-A through opening in cylinder head and seat tool firmly in the head of tappet.
将液压挺杆拆卸/安装工具C-4129-A滑入汽缸盖开口，在挺杆头内将工具安置牢固。
10.
hydraulic semi-automatic special lathe for gas valve of automobile
液压半自动汽车气门专用车床
11.
Fill the tester cup with hydraulic valve tappet test oil until the tappet is completely submerge
为测试杯注入阀门挺杆测试油，直到挺杆完全浸入水中。
12.
Study on Intake Performance of SI Engine with Fully Variable Valve Hydraulic Actuation System
发动机全可变液压气门机构进气性能的研究
13.
A rod moved by a cam to operate the valves in an internal-combustion engine.
阀门挺杆通过凸轮转动的杆，用来操纵内燃机的阀门
14.
Hydraulic Valve Lash Adjuster (HLA) and Valve Train with HLA
液压气门间隙调节器及有间隙调节器的气门机构的研究
15.
Experimental Research on Springback and Impact of Electronic Control and Hydraulic Full Variable Valve
电控液压全可变气门冲击回弹试验研究
16.
Lift the ram and position the tappet (with the ball bearing) inside the tester cup.
举起压头，在测试杯中定位挺杆（带滚珠轴承）。
17.
bar actuated pressure vent
杆式驱动液压排出孔
18.
helical spline type actuator
带螺旋活塞杆的液压缸