1.
Study on Reinforcement-curtain Effect and Pile-soil Load Share Ratio of Pile Groups;
群桩“加筋遮帘”效应及桩土荷载分担比研究
2.
Influence of pile spacing, pile cap dimension and angle of internal friction of embankment filling on the pile efficacy is analyzed.
研究了桩间距、桩帽大小和填料内摩擦角对桩体荷载分担比的影响。
3.
The key point in the piled raft foundation design is to determine the proportion of load carried by piles and raft and the effect of diminished settlement of piles.
桩筏基础设计的关键在于确定桩筏的荷载分担比及桩对减小沉降的作用。
4.
A load or burden that is too full or heavy.
超载过量或过重的载荷或负担
5.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
6.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。
7.
There is one oil groove in the bronze bushing, where lubricant can flow into the axis from the oil hole on the cap of housings.
轴瓦内表面的不承担载荷部分开有油槽，润滑油通过进油孔和邮沟流进间隙。
8.
Finite Elemtnt Analysis of Cable-Stayed Bridge under Static and Wind Loadings;
静载荷与风载荷作用下的斜拉管桥有限元分析
9.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
10.
Analysis of horizontal buckling loads of structure with consiering the influence of vertical loads
考虑竖向荷载影响的结构水平临界荷载分析
11.
Analysis on load transfer for caped piles under large area of embankment
大面积路堤荷载下带承台桩的荷载传递分析
12.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
13.
Second, measure the load of the gear and its revolutional speed in step, and change the load distribution on time into another load distribution on loaded numbers.
制谱时应把载荷时间分布按载荷—转速规律化为载荷次数分布,然后进行制谱。
14.
Survey Results for Concrete Construction Live Loads and Analysis of Load Effects Using Influence Surfaces
建筑施工期活荷载统计分析及荷载效应影响面分析
15.
Fragment distribution analysis of masonry wall under blast load
爆炸荷载作用下砌体墙碎片分布分析
16.
The major portion of the loading on an open frame structure consists of the drag loading.
作用在构架外露的结构物上的载荷，大部分是由拖曳载荷构成。
17.
The load at each bearing point is the sum of the two distributed load on two ends.
每个支吊点的荷载为前后两跨段所分配荷载之和。
18.
Distributed loadis regarded as polynomial function or uniformly distributed moment alh ng the edge.
荷载采用了多项式形的分布荷载及均布边缘力矩。