1.
Analysis of U~(238) Fission Rate Experiment onφ600mm Depleted Uranium Sphere by D-T neutron
D-T中子在φ600贫化铀球中的U~(238)裂变率实验数据分析
2.
fission fusion fission bomb
裂变 聚变 裂变弹
3.
Measurement of 25.5MeV Neutron Fluence Rate With ~(238)U Fission Chamber
~(238)U裂变电离室测量25.5MeV中子注量率
4.
testing method for percentage of breaking and bursting strength lowering of textiles to oxygen-bleaching
氧化物漂白处理纺织品断裂强力和断裂伸长率变化测定法
5.
Research on the Dynamic Fracture Characteristics of 40Cr and 30CrMnSiNi2A Material under High Strain Rate;
40Cr和30CrMnSiNi2A材料高应变率动态起裂特性的研究
6.
Steady Creep Rate and Rupture Life for 2.25Cr-1Mo Steel
2.25Cr-1Mo钢稳态蠕变速率和断裂寿命的研究
7.
Necking and Fracture of Oxygen-Free high Conductive Copper Bars Subjected to high Strain Rate Tension
高导无氧铜杆高应变率拉伸下的颈缩与断裂
8.
Analysis of strain energy release rate based on virtual crack closure technique
基于虚拟裂纹闭合技术的应变能释放率分析
9.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
10.
Power Transmission Model of Step-down Piezoelectric Transformer and Decomposition Analytic Approach for PT Converter
降压型压电陶瓷变压器功率传输模型及其变换器撕裂分析法
11.
fission product contaminants
裂变产物裂变污染物
12.
Studies on Crack Propagation under Fatigue-creep Combined Action of 316L Steel at High Temperature;
316L钢高温疲劳蠕变共同作用下裂纹扩展速率研究
13.
The Study on the Experiment of the Dynamic Fracture Toughness of Rate-dependent and Elastic-plastic Materials;
应变率相关弹塑性材料动态断裂韧性的试验研究
14.
Influence of steel fiber volume fraction and strain rate on spalling behavior of ultra-high performance cementitious composites
钢纤维掺量和应变率对超高性能水泥基复合材料层裂的影响
15.
Influences of Concentration,Temperature and Strain Rate on Stress Corrosion Cracking of 316L Stainless Steel in Alkali Solution at High Temperature
高温碱液浓度与温度及应变速率对316L不锈钢应力腐蚀开裂的影响
16.
The comparative study of heat deformation performance and fatigue crack growth rate between XCQ16-1 and 20Mn2
XCQ16-1与20Mn2热变形性能和疲劳裂纹扩展速率的对比研究
17.
Numerical calculation of strain energy release rate and mode-mixity for interface crack tip of composites
复合材料界面裂纹尖端应变能释放率及模态混合度计算
18.
Used for testing indexes of polyurethane monofilament, such as breaking tenacity, elongation at break, load at specified elongation, relaxation of stress, plastic deformation, etc.
用于测定氨纶丝断裂强度、裂伸长率、伸长负荷、力松驰、性变形等性能指标。