1.
Research on Theory and Technology of Health Maintenance for Large-scale Rotary Kiln with Multi-support;
大型多支承回转窑健康维护理论与技术研究
2.
The Simulating Research on Active Control to the Low Frequency Vibration of a Large Rotor Shaft System with Multi-support;
大型多支承旋转轴系低频振动主动控制模拟研究
3.
Most Bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
大多数轴承都支承径向或轴向负荷的转轴。
4.
Injection mould for plastic large-size mould bases-Support plates
GB/T12555.5-1990塑料注射模大型模架支承板
5.
Development of new bearing for large-scale rotary kiln
大型水泥回转窑新型支承装置的研究开发
6.
Domestic Research on Large-Size TQITSE Bearing Used on Supported Roller of Imported Cold-Rolling Mill;
进口冷轧机支撑辊用大型TQITSE轴承国产化研究
7.
The Design of the Winding-pipe Machine Principal-axis Magnetism Supporting System;
大型设备电缆绞机的磁悬浮支承系统设计
8.
Fault diagnosis and repair technique of the large-scale slewing bearing
大型回转支撑轴承故障检测及修复工艺
9.
Enabling technologies for new rotary support device of ultra-large-scale rotary floating cranes
超大型全回转浮吊新型回转支承装置关键技术的研究
10.
"Rotary fulcrum bearings are large-sized bearings which can be subjected to combined axial, radial loads and tipping moment."
回转支承是一种能够承受综合负荷的大型支承,可同时承受较大的轴向负荷,径向负荷和倾翻力矩。
11.
Axial magnetic force model for large outer diameter multi-annular-nesting permanent magnetic bearings
大外径多环嵌套永磁轴承轴向磁力模型
12.
"In most cases, the engine is supported by the frame at three or four places."
在大多数情况下,发动机用三个或四个支承点与车架固定在一起。
13.
Dynamic Optimization Design of a Big Turbo-Generator Rotor-Bearing System;
大型汽轮发电机组转子-支承系统动态优化设计研究
14.
Study of Spherical Friction Pair Based on Hydrostatic Bearing of High Precision Static Balancing Machine for Huge Rotor;
高精度大型转子静平衡仪静压支承球面摩擦副研究
15.
The Research of Large-diameter Antifriction Bearing s Trouble Mechanism and Diagnosing Technology of Trouble;
大型回转支承装置故障机理及故障诊断技术的研究
16.
Key Technology and Realization of the Instrument for Signal Collection;
大型回转支承故障检测仪若干关键问题的分析研究
17.
Investigation on Health Monitoring and Evaluating System Design for Long-span Cable-supported Bridges
大跨缆索支承型桥梁健康监测与评估系统的设计研究
18.
FEM Analyses on Forming Mechanics of Inclusion Defects Inner Heavy Backup-Roll Forging
大型支承辊锻件内部夹杂性缺陷形成机理的FEM分析