1.
Auto Thin Case Injected Plastic Part Tilting Distortion & Manufacturing Process Optimization Research;
汽车薄壳注塑件翘曲变形及注塑工艺优化研究
2.
APPLICATION OF CAE TECHNOLOGY TO INJECTION PROCESS ANALYSIS OF PLASTIC OIL PIPELINE JOINTS
CAE技术在塑料油管接头注塑工艺分析中的应用
3.
Effect of injection parameters on residual stress of plastic long ruler
注塑工艺参数对塑料长尺残余应力的影响
4.
Molding Design and Injection Process of the Component Made from ABS;
ABS材料零件的注塑工艺和模具设计
5.
THE OPTMZATON OF NJECTON PROCESS AND THE ESTMATON OF AVERAGE VALUE BASED ON THE WARP
基于翘曲的注塑工艺优化与均值估计
6.
Influence Analysis of Injection Process Parameters on Sequential Overmolding Injection
注塑工艺参数对双色注射成型影响分析
7.
Influence of Processing Parameters and Fiber Content on Shrinkage of Fiber-Reinforced PP Injection-Molded Part
注塑工艺和玻纤含量对玻纤增强PP注塑制品收缩的影响
8.
Pits are formed in the polycarbonate disk by an injection molding process.
坑形通过注塑工艺在聚碳酸脂盘面形成。
9.
In the injection stretch blow moulding process, injection moulding machine is used to make the preform.
注拉吹工艺先用注塑机注出瓶坯。
10.
ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE
用原塑料制件为模芯电铸注塑模型腔工艺
11.
The Research of Precision Injection Molding of Optical Plastic Lens;
塑料非球面光学镜片注塑成型的工艺研究
12.
Simulation of Injection Molding and Optimization of Molding Parameter for the Plastic Part with Complicated Structure
复杂塑件的注塑成型模拟及工艺参数优化
13.
Process Parameters Optimum of Injection Molding and Injection Mould Design of Plastic Gear
塑料齿轮成型工艺参数优化及注塑模具设计
14.
Research on Process Automated Planning for Parts of Injection Mold Based on Pro/ENGINEER;
基于Pro/ENGINEER的注塑模零件工艺决策研究
15.
The Molding Technological Research of Large-scale Vehicle Plastic Parts
大型汽车用塑件的注射成型工艺研究
16.
Rich experience in all plastic production processes such as injection mold， vacuum mold， forming， plastic extrusion& fabrication etc.
－深谙各种塑料产品之加工工艺，如普通注塑，真空注塑，塑料挤出，热加工等。
17.
Optimization of the Gas-Assisted Injection Molding Process for the Typical Automotive Plastic Parts
典型汽车注塑件的气辅注射成型工艺优化研究
18.
Optimization of Injection Mould and Rapid Setting of Processing Parameters of Injection Moluding Based on Numerical Simulation
基于数值模拟的注塑模具优化及注塑成型工艺参数快速设置