1.
Study on the Fabrication and Properties of MoSi_2/SiC That by Melt Infiltration;
直接浸渗法制备MoSi_2/SiC复合材料及材料性能研究
2.
Investigation on Al/SiCp Electronic Packaging Materials Fabricated by Gas Pressure Infiltrating Processes;
气压浸渗法制备Al/SiCp电子封装材料的研究
3.
Preparation of High Porosity Copper Foam by Polyurethane Sponge Impregnation Method
聚氨酯海绵浸渗法制备高孔隙率泡沫铜
4.
A Study on the Bending Strength and Wear Resistance of SiC/Al Composites by Pressureless Infiltration;
无压浸渗法制备SiC/Al复合材料强度和耐磨性的研究
5.
Preparation and Thermal Expansion Propertise of SiC_P/Al Composites by Vacuum Pressure Infiltration Precess;
真空压力浸渗法制备SiC_P/Al复合材料及热膨胀性能研究
6.
Synthesis and Anti-Ablation Proterty Investigation of C/C-TaC Composites;
化学液相浸渗法制备C/C-TaC复合材料及其烧蚀性能研究
7.
Structure and Properties of C/SiC Friction Material Made by Reactive Melt Infiltration;
反应熔体浸渗法制备C/SiC摩阻材料的结构与性能
8.
Effect of the Reactive Additions on the SiCp/Al Composites Fabricated by the Pressureless Infiltration Technique;
活性剂对无压自浸渗法制备SiCp/Al复合材料的影响
9.
Fabrication and Properties of β-SiCp/Al Electronic Packaging Material by Pressureless Infiltration;
无压浸渗法制备β-SiCp/Al电子封装材料工艺与性能研究
10.
Study on Technology and Properties of Al_2O_(3f)/AZ91D Composite Prepared by Pressrueless Infiltration Method;
无压浸渗法制备Al_2O_（3f）/AZ91D复合材料工艺及性能研究
11.
Preparing of 3D C/SiC-TaC Composites Using Slurry and CVI Method and Research on Anti-ablation Property
料浆浸渗法结合CVI制备3D C/SiC-TaC复合材料及其烧蚀性能研究
12.
Presureless Infiltration and Thermal-properties of SiC Porous Ceramics Reinforced Al Composites for Electronic Packaging
SiC/Al基电子封装复合材料的无压浸渗法制备与热性能研究
13.
The structure/ function integrating aluminium matrix composite was prepared by pressureless infiltration( a new casting technology) and the properties of the composite were tested in this paper.
采用新型铸造-无压浸渗法制备了结构/能一体化铝基复合材料,并对该复合材料进行了性能测试。
14.
Study of Flue Gas Desulfurization by Contained Liquid Membrane
液膜法烟气脱硫试验 Ⅰ.含浸液膜渗透器特性
15.
Uranium dioxide pellets Determination of density and amount of open and closed porosity Boiling water method and penetration immersion method??
二氧化铀芯块? 密度和开口孔及闭口孔的测定? 沸水法和渗透浸没法
16.
liquid infiltration
液体渗入，液体浸油
17.
diffusion juice velocity
浸提器中渗出液的速度
18.
Influence of Impervious Body of Dam Foundation on Saturation Line and Seepage
土坝坝基防渗体对浸润线和渗流量的影响分析