1.
Study on Front Extreme Position of Beating-up Reed of Four-bar Beating-up Mechanism;
四连杆打纬机构打纬筘前心位置的分析与研究
2.
Analysis of reed-base′s front extreme position for four-bar beating-up linkage
四连杆打纬机构的筘座前心位置分析
3.
Dynamic Analysis of a Two-side Four-bar Beating-up Motion of an Air-jet Loom;
喷气织机双侧四连杆打纬机构动态分析
4.
Influence of Measurement Deviation Upon Motion Error for Four-Bar Linkage Beating-Up Mechanism
四连杆打纬机构尺寸偏差对运动误差的影响
5.
Study on Dynamic Analysis and Balancing of Four-bar Beating-up Mechanism of Air-jet Loom;
喷气织机四连杆打纬机构的动力学分析及动平衡研究
6.
This paper analyses the linkage beating-up mechanisms based on technical requirements of the bating-up movement for weaving.
依据织造工艺对打纬运动的要求分析了连杆打纬机构。
7.
Design and Study of Beat-up Mechanism and Weft Insertion Mechanism of High-powered Rapier Looms;
高性能剑杆织机打纬和引纬机构的设计与研究
8.
Analysis of the Oscillation and Turbulence Process of the Four-bar Beating-up Mechanism with Motion Dual Clearance;
含运动副间隙的四杆打纬机构振动和涡动过程分析
9.
Analysis of Weft Insertion Mechanism of Spatial Mechanism
基于虚拟样机的空间连杆引纬机构分析
10.
Analysis and optimization of rapier loom′s beating cam conjugate
剑杆织机打纬共轭凸轮机构分析及优化
11.
Variation laws of connecting rod curves for five bar and similar four bar mechanism
类四杆五杆机构连杆曲线的变化规律
12.
If no yarn is present, these devices, through a series of linkages, stop the loom.
如果纬纱不存在,此机构通过一系列的连杆使织机停车。
13.
Explains the steps required to design a four bar linkage.
解释设计一个四连杆机构所需的步骤。
14.
MATLAB Simulation Teaching Technique in the Plane Four Links Mechanism;
平面四连杆机构的MATLAB仿真教学法
15.
Optimize and Design for the Four-Link Structure of the Die Bonder and Motion Simulation Based on the CosmosMotion
基于CosmosMotion的焊头四连杆机构优化设计
16.
Kinematical Analysis of a Four-bar Mechanism Using MATLAB
基于MATLAB的四连杆机构运动分析
17.
STUDY ON LATERAL BUCKLING OF AN ARCHED LINK OF FOUR BAR LINKAGE
铰链四杆机构圆弧型连杆的侧向失稳分析
18.
Dynamic Simulation of a Four Bar Mechanism with Clearance in Linkage-Rocker Joint based On Virtual Prototyping Technology;
含连杆摇杆运动副间隙四杆机构动力学仿真研究