1.
Studies on taper equation for larch plantation in eastern Heilongjiang
黑龙江东部地区落叶松人工林削度方程研究
2.
A Study on Taper Equation and Stand Outturn Tables of Wood Sorts for Japanese Larch
日本落叶松削度方程和林分材种出材率表的研究
3.
Influence of Cutting Speed on Temperature Distribution in Cutting Process
切削速度对切削过程温度分布影响的研究
4.
The development of the project is seriously impeded by a reduction in fund.
由於基金削减工程进度严重受阻。
5.
The development of the project be seriouslyimpeded by a reduction In fund
由於基金削减工程进度严重受阻
6.
His salary was slashed to the bone.
他的工资被削减到最低程度。
7.
The development of the project was seriouslyimpeded by a reduction in funds.
由於基金削减工程进度严重受阻.
8.
An Analysis of the Process of Axial Vibration Drilling and Chip Length
轴向振动钻削过程及其切屑长度分析
9.
A lowering in amount, degree, or position.
降低，削弱数量、程度或地位的降低
10.
Modeling and Appling of Drilling Speed of Cutting Type PDC Bit;
切削式PDC钻头钻速方程建立及其应用
11.
This unit used for percision grinding of square tools with any direction, easy to operate.
该装置用于方体刀具各切削角度的精密磨削，操作简单方便。
12.
Coupled algorithm for the simulation of temperature distribution in cutting tool
车削刀具内温度分布模拟的耦合方法
13.
Moreover, the presence of nonexperts is some protection against the advisory committee operating in a manner that decreases public accountability.
另外，非专家的存在，某种程度上可以防卫咨询委员会不能以削弱公共责任的方式运作。
14.
today there is a dumbing-down of the curriculum by lowering standards and greatly reducing the content taught in classrooms.
今天，却出现了通过降低标准、大幅度削减课堂教学内容等方法简化课程的现象。
15.
forming process and mechanism of cutting direction burr under orthogonal cutting are simulated and analyzed;
仿真并分析了正交切削条件下切削方向毛刺的形成过程与机理；
16.
Modeling Methodology of Milling Deflection and Flexible Milling Force for Tooth Profile of Low-rigidity Cycloid Gear in High Speed Milling
低刚度摆线轮缘高速铣削变形与铣削力建模方法
17.
Continously,by the method of orthogonal design,in the certainconditions, the mathematic models for cutting force and temperature were esta-lished;
继而,采用正交设计试验方法,建立了某些切削条件下,切削力、切削温度的数学模型;
18.
Quasicontinuum Simulations of Nano-cutting Process
纳米尺度下切削过程的准连续介质力学模拟