1.
3-Way Plug Valve 1;3-Way Plug Valve 2;3-Way Plug Valve 3
![点击朗读](/dictall/images/read.gif)
向旋塞阀 1;3 向旋塞阀 2;3 向旋塞阀 3
2.
General purpose industrial valves-Iron plug valves
![点击朗读](/dictall/images/read.gif)
GB/T12240-1989通用阀门铁制旋塞阀
3.
Application of Eccentric Stopcock in Descaling System of Steel Rolling
![点击朗读](/dictall/images/read.gif)
偏心旋塞阀在轧钢除鳞系统中的应用
4.
Then as the plug valve is lifted off its seats, any accumulation below the plug or on the seats will be blown back into the line.
然后,当旋塞阀升离阀座时,任何累积在阀塞或阀座上的吹入物质都将被吹回到管路内。
5.
A regulated opening for discharging a liquid, as in a small stopcock.
![点击朗读](/dictall/images/read.gif)
水龙头用于控制液体排出的开口,如在小的旋塞阀里
6.
Alternately the test cock may be opened to break any suction caused by lifting internal assembly.
测试旋塞阀可能要交替开启,以阻断由于取出阀内件总成导致的任何吸力。
7.
This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
这是一个闸阀(止回阀、蝶阀、切断阀、电磁阀、遥控阀、安全阀、节流阀、旋塞)。
8.
For use with backflow preventer test cocks to protect from damage.
![点击朗读](/dictall/images/read.gif)
用于防回流阀测试旋塞,防止受到破坏。
9.
The test cock is on the inlet side of the shutoff valve.
![点击朗读](/dictall/images/read.gif)
测试旋塞位于关闭阀的进口一侧上。
10.
Neoflon inserts are available for globe, piston, and swing check discs.
![点击朗读](/dictall/images/read.gif)
备有可用于截止阀,活塞和旋启式止回阀阀瓣的四氟乙烯镶嵌件。
11.
Resilient inserts are available for globe, piston and swing check discs.
![点击朗读](/dictall/images/read.gif)
可以为截止阀、活塞或旋启式止回阀阀瓣提供弹性镶嵌物。
12.
The shutoff valve with the test cock is to be mounted on the inlet side of the backflow preventer.
带测试旋塞的关闭阀安装在防回流阀的进口一侧。
13.
Close shutoff valves and open test cocks No. 2, 3 and 4 to relieve pressure from the body of the valve.
关闭关闭阀,并开启测试旋塞2号、3号和4号,释放阀体内压力。
14.
a small cock or faucet or valve for letting out air or releasing compression or draining.
![点击朗读](/dictall/images/read.gif)
放出空气或浓缩或排泄的小栓或旋塞或阀。
15.
hose-pipe nozzle fitted with tap, cocks, valves or other devices for regulating liquid flow
软管喷嘴,装有螺塞、旋塞、阀门或其他调节液体流量的装置
16.
The assembly shall also include two resilient seated isolation valves, four top-mounted resilient seated test cocks and an air gap drain fitting.
这种总成应该包括两个弹性阀座隔离阀,四个顶部安装弹性阀座测试旋塞和一个气隙排放接头。
17.
Check Valve 1;Check Valve 2;Check Valve 3;Screw-down
![点击朗读](/dictall/images/read.gif)
止回阀 1;止回阀 2;止回阀 3;旋拧阀
18.
Open upstream slowly, fill the valve and bleed the air through Test cock 2, 3 and 4.
![点击朗读](/dictall/images/read.gif)
慢慢开启上游,注满阀门,通过测试旋塞2,3和4号排放空气。