1.
We have acomplished some experimental study on the mixing action in carding machine, employing different lengths of cotton fiber, increasing the number of fixed flats and decreasing the number of moving flats.
就棉纤维长度、增加固定盖板根数、减少活动盖板根数对混合作用的影响做了试验研究。
2.
The Influence of the Numbers of Movable and Stationary Flat on Nep and Impurity
活动盖板和固定盖板根数对棉结杂质的影响
3.
Study on the Back Stationary Flat and Webclean in Carding Machine;
梳棉机加装后固定盖板及棉网清洁器问题的研究
4.
crowfoot holddown
将盖子固定在搭板上的叉子
5.
deck securing fitting
甲板绑扎固定用具; 甲板或舱盖上固定集装箱的装置
6.
Remove the four screws that secure the ACM mounting bracket to the floor pan transmission tunnel.
拆去固定ACM固定支架到底板变速器-传动轴盖板的四个螺丝。
7.
Welding residual stresses of cover-plate retrofitted steel moment connections
梁柱刚接节点盖板加固的焊接残余应力分析
8.
Very close setting of front plate or non-parallel setting.
前固定盖板针布隔距太紧或与锡林针布不平行。
9.
Position the underhood lamp on the hood inner panel.
将引擎盖未闭合灯固定于引擎罩内板上。
10.
Some suggestion on supplementing gerschgorin's disk theorem in linear algebra
线性代数课程增加盖尔圆定理的思考
11.
Sheet metal used to reinforce and weatherproof the joints and angles of a roof.
防雨板，盖片屋顶接缝处或角上用于加固或防风雨的金属薄板
12.
Speeding Fixed Assets Depreciation Increasing Enterprise Cash Flow;
加速固定资产折旧 增加企业现金流量
13.
Install push-in fasteners holding trunk lid slam bumpers to top of fascia.
安装将行李厢盖沿保险杆紧固到面板顶部上的推进式固定件。
14.
Remove push-in fastener attaching trim cover to door inner panel (use special tool C-4829).
拆下把装饰盖板固定在车门内板的压入式钩扣（用特殊工具C-4829）。
15.
Uncertainty analysis of calculation model for strengthened with bonded steel plates
粘贴钢板加固计算模式不确定性分析
16.
Remove screws attaching the adjuster to the grille opening reinforcement (GOR).
拆卸用以固定调整器至格栅口加固板的螺丝。
17.
Theoretical Research on Concrete Plates Reinforced with CFRP Sheets;
碳纤维增强复合材料加固混凝土板的理论研究
18.
Boundary Element Analysis of CFRP Reinforced Steel Plates
碳纤维增强复合材料加固钢板的边界元分析