1.
Variation of void ratio in course of consolidation of warping clay
淤填黏土固结过程中孔隙比的变化规律
2.
The ratio of the volume of all the pores in a material to the volume of the whole.
孔隙率一材料中孔隙的总体积与整个材料的体积之间的比率
3.
Simplifying the aspect ratio distribution of reservoir pore and predicting the type of it by Kuster-Toksz equation
利用Kuster-Toksz方程简化孔隙纵横比谱及判断储层孔隙类型
4.
Aeration porosity is more sensitive than total and capillary porosity to reflect soil compaction degree.
与总孔隙度和毛管孔隙度相比,通气孔隙度在反映土壤压实时更为敏感。
5.
Application of ASAP2020 specific surface area and porosity analyzer.
ASAP2020比表面积及孔隙分析仪的应用
6.
Comparison of Porosity Detection Method of the Composites
复合材料孔隙率检测方法的比较研究
7.
Comparison of D-T and D-D accelerator investigation characteristics in pulsed neutron porosity logging while drilling
氘-氘和氘-氚随钻中子孔隙度测井探测特性对比
8.
Comparative Study on the Soil Water Retention Curve between Macroporous Soil and Homogeneous Soil
大孔隙土壤与均质土壤水分特征曲线比较研究
9.
APPLICATION OF CCARBO/OXYGEN SPECTRAL LOGGING IN DETERMINATION OF POROSITY
碳氧比能谱测井在确定孔隙度中的应用
10.
ocks having original porosity are more uniform in their characteristics than those rocks in which a large part of the porosity is induced.
具有原生孔隙度的岩石比次生孔隙度占大部分的岩石在性质上更具有一致性。
11.
Along with the increase of deepness, to porosity and permeability, mudstone reduce much more than sandstone.
随深度的增加，泥岩孔隙度和渗透率降低的幅度比砂岩大。
12.
Seismic Pore Water Pressure Analysis Confronted with Field Measurements in Fine Sand
细砂中地震孔隙水压力的分析与现场观测的对比
13.
Influences of Surface Area and Pore Structure on Electrochemical Performance of Electric Double-layer Capacitance
活性炭比表面积与孔隙结构对双电层电容特性的影响
14.
Comparative studies on methods of evaluation of reservoir pore structure by using NMR (nuclear magnetic resonance) well logging data
利用核磁共振(NMR)测井资料评价储层孔隙结构方法的对比研究
15.
Comparative Study on Predicting Porosity by Different Roughness Indices
不同粗糙度尺度下预测表层土壤孔隙率量化指数比较研究
16.
A separation, an aperture, a fissure, or a short passage in an organ or a body part.
裂孔，孔器官或身体部位中的孔隙、隙缝、裂隙或通道
17.
Porosity may be classified according to the mode of origins (1) original and (2) induced.
按其原始形态，孔隙度可分为原生孔隙度和次生孔隙度。
18.
The pore spaces are completely dominated by primary porosity and pores, vogs and fractures with secondary origination.
孔隙空间主要是原生孔隙及由次生原因形成的孔隙和裂缝。