1.
The results show that the product properties can be improved obviously, and theparticle size of fillers may have influences on plasticization, tensile strength, breakingelongation and flame retardation of product.
不同粒径的氢氧化铝粉末对搪塑制品的塑化程度、伸强度、裂伸长率、烟、燃效果均有不同影响。
2.
A STUDY ON THE CONVENTIONAL THEORY OF MECHANISM-BASED STRAIN GRADIENT PLASTICITY FOR MIXED HARDENING BY THE METHOD OF CHARACTERISTICS
采用特征线方法对混合硬化情况下基于变形机制的应变梯度工程塑性理论的研究
3.
Melting process of polymer under pure vibration force field (Ⅱ) Effect on melting rate of vibration parameters
纯振动场作用下聚合物熔融塑化过程(Ⅱ)振动参数对熔融速度的影响
4.
Numerical simulation for velocity and pressure in filling stage of injection molded parts with uneven thickness
注塑充填过程变厚度截面速度压力场数值模拟
5.
Influences of plasticizing temperature and molding temperature on mechanical properties of plasticized PVC and PVC/PNBR elastomer
塑化温度和成型温度对增塑PVC及PVC/PNBR弹性体力学性能的影响
6.
Development of Visual Device for Injection Molding Process;
注塑成型过程可视化实验装置的研制
7.
Efficiency Optimization Control of Pulp-Modled Production Line s Drying Process;
纸浆模塑生产烘干过程效能优化控制
8.
Analysis on the Construction of Organizational Culture in the Process of ERP Implementation
ERP实施过程中的企业文化塑造分析
9.
hardness testing methods for rubber, vulcanized or thermoplastic
硫化橡胶及热塑橡胶硬度试验方法
10.
test method for tensile heat distortion temperature of plastic sheeting
塑料板材的拉伸温度变化测定法
11.
test method for brittleness temperature of plastics and elastomers by impact
塑料及弹性体冲击脆化温度试验方法
12.
Test method for brittleness temperature of plastics by impact
GB/T5470-1985塑料冲击脆化温度试验方法
13.
Study of The Theory of Deformation - Failur Localization For Coal;
煤体变形局部化的梯度塑性理论研究
14.
For blow molding, melt temperatures of160° C to220° C are recommended.
吹塑成型的推荐熔化温度在160到220度之间。
15.
The Numerical Simulation for Steady Temperature Fields in Cavity Die of Injection Mould in Cooling Processing;
注塑模凹模冷却过程稳态传热温度场数值模拟
16.
The Elestopastic Time-history Reliability Analysisty of Concrete Frame Structures;
混凝土框架结构弹塑性时程可靠度分析
17.
Time-Histroy Analysis of Frame Structure with Consideration of the Influences of the Plastic Zone Length;
框架结构考虑塑性区长度的静力全过程分析
18.
Elasto-plastic time-history analysis on non-platform-column canopy of New Guangzhou Railway Station
车站大跨度索拱钢结构雨棚弹塑性时程分析