1.
through-tubing squeeze gravel packing
过油管砾石挤压充填
2.
multiple squeeze slurry pack technique
多次挤压砂浆充填技术
3.
Development of Filling Horizontal Indirectional Squeezing Casting Machine(LK/HH)
填充式间接挤压铸造及全卧式LK/HH型挤压铸造机的开发
4.
Study on Squeezed-transport Theory and Application of Pipeline Hydraulic Filling at High-density;
高浓度充填料浆管道挤压输送理论与应用研究
5.
Mold filling smoothly with low speed and large flow rate as well as instant pressurization in time conformed to the basic principles of squeezing casting.
论述了以低速、流量、稳充填铸型并在瞬间及时增压是挤压铸造的基本原理。
6.
double crossover-squeeze gravel pack method
双桥分流式挤入砾石充填法
7.
low voltage He filled proportional counter
低压充填氦正比计数器
8.
Filling Path Optimization of FDM System for Fuse Extrusion
熔丝挤出快速成型系统的填充路径优化
9.
THE INFLUENCE OF SETTING EXTRUSION WALL AND FILLING MATERIALS BETWEEN FACE SLAB AND INTERFACE ON THE CONCRETE-FACED ROCKFILL DAM
面板堆石坝设置挤压墙以及面板与挤压墙间填料特性的影响分析
10.
Repacking while valve is pressurized is not recommended.
不推荐在阀门压力增加时补充填料。
11.
Pressure Releasing of Underground Filling System in Hedong Gold Mine
河东金矿井下充填系统压力释放方法
12.
An in vitro comparison study on sealing ability of continuous-wave condensation method and cold lateral condensation method
连续波热塑充填和冷牙胶侧压充填根尖封闭效果的比较研究
13.
Research on the Composites of Wood-Fiber Filled Thermoplastics and the Extrusion Technique;
木质纤维填充热塑性塑料复合材料与挤出成型的研究
14.
Study on Filler Modification of UHMW-PE and Its Force-Lubrication Extrusion by Co-Rotating Twin Screw Extruder;
UHMW-PE填充共混改性及实施双螺杆强制润滑板材挤出的研究
15.
The Mechanical Properties of HDPE/Mg(OH)_2 as a Filling System in Tri-Screw Dynamic Mixing Extruder
三螺杆动态混炼挤出HDPE/Mg(OH)_2填充体系的力学性能
16.
Squeeze gently, allowing the child adequate time to swallow the medication.
轻轻挤压，使小儿有充分的时间吞咽药物。
17.
The channel is filled with noncompactible sand, or with sand and gravel.
水道内由不可压实的砂或砂砾物质充填。
18.
Influence of He, Ne and Ar Pressure on the Spectra and Filling of 2p￣53p Level of Ne
氦、氖、氩气体压力对氖光谱和能级填充的影响