1.
Thickness distribution at the deforming zone of aluminum tube in mechanical expanding
铝管锥形模机械扩径变形区壁厚分布规律
2.
Influence of Temperature on Parts` Wall Thickness and Properties in Extrusion Blow Molding
温度对挤出吹塑制件壁厚分布及性能的影响
3.
Analysis on thickness distribution in superplastic bulge forming of aluminum alloy
铝合金超塑性气胀成形壁厚分布工艺研究
4.
APPLICATION RESEARCH OF THE DESIGN OF ALLOTYPE DIE ON THE OPTIMIZATION OF THE WALL THICKNESS DISTRIBUTION OF TYPICAL HOLLOW INDUSTRY PARTS
口模异型化设计在优化挤出吹塑中空工业制件壁厚分布中的研究与应用
5.
Study of Thermal Stress Distribution on Thick Wall Cylinder by Thermal Shock Treatment;
厚壁圆筒热冲击作用下应力分布研究
6.
Research on Distribution Law of the Measured Both Inner and Outer Force of Freezing Shaft Lining in Special Thick Alluvium
特厚表土层冻结井壁内外力分布规律实测研究
7.
Numerical Analysis of Wall-thickness Thinning during the NC Tube Bending Process;
薄壁管数控弯曲成形壁厚变薄的数值分析
8.
Research on Non-uniform Wall Thickness of Thin-wall Pipe Rolled by Three-high Pipe Mill
三辊轧管机薄壁管轧制壁厚不均的分析
9.
The fixed anvil of the tube micrometers has spherical surface. They are suitable for measuring the thickness of tubes.
壁厚千分尺固定测砧为球面，适用于测量管壁厚度。
10.
Clinical Analysis of 199 Cases of the Hepatic Cirrhosis with Gallbladder Wall Thickening;
肝硬化合并胆囊壁增厚199例临床分析
11.
Clinical Analysis of 334 Cases the Hepatic Cirrhosis with Gallbladder Wall Thickening
肝硬化合并胆囊壁增厚334例临床分析
12.
Service Life Analysis for the Thick-wall Components of the 600MW Supercritical Boiler
600MW超临界锅炉厚壁部件寿命分析
13.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
14.
Finite Element Simulation Analysis of Welded Tube Forming with Small Diameter and Thickness
小直径厚壁焊管成型有限元仿真分析
15.
A Preliminary Study on Caloric Values and Biomass Distribution of Phyllostachys edulis cv. Pachyloen
厚壁毛竹热值与生物量分配规律初探
16.
Analysis on Elastoplastic of Thick Spherical Shell with Different Modulus of Tension and Compression
不同拉压模量厚壁球壳的弹塑性分析
17.
A ledge or recess in a wall formed by a reduction in thickness above;a setoff.
壁阶为缩减其上方墙壁的厚度而形成的墙壁狭长部分或凹处
18.
Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;
壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析