1.
Research on Semi-solid Microstructure and Processing Parameters of Thixomolding Injection AZ91D Magnesium Alloy;
AZ91D镁合金半固态组织及其触变注射成型工艺参数的研究
2.
Solid Solution and Aging Treatment of Thixoforming AZ91D Alloy
触变注射成形AZ91D的固溶和时效热处理
3.
Study on the Thixomolded Process and Heat Treatment of AZ91D Magnesium Alloy;
AZ91D镁合金触变注射成形工艺及热处理研究
4.
Simulation of Injection Moulding for AC Contactor Shell Based on Moldflow
基于Moldflow的交流接触器外壳注射成型模拟研究
5.
Research on the Microstructure and Properties and Processing Simulation for Thixomolded Magnesium Alloy;
触变注射成形镁合金组织和性能研究及成形模拟
6.
New Injection Molding Technology--Water-Assisted Injection Molding
新型注射成型技术——水辅助注射成型
7.
NEW TECHNOLOGY OF INJECTION MOLDING:GAS-ASSISTED INJECTION MOLDING;
注射成型新工艺:气体辅助注射成型
8.
Numerical Simulation on the Rheologic Behavior in the Polymer Oscillation Injection Molding Process;
聚合物振动注射成型中流变性的数值模拟
9.
injection forming machine of micro-foam type
注射微孔发泡成型机
10.
The Research on the Microstructure and Process of Thixomolding AZ91D Magnesium Alloy;
AZ91D镁合金半固态触变注射组织与工艺研究
11.
Inversion of Thermal Contact Resistance in Injection Molding;
注塑成型过程中的接触热阻反演研究
12.
Research of Residual Stresses and Warpage of Plastic Injection Molding Based on Surface Model
基于表面模型的塑料注射成型残余应力与翘曲变形研究
13.
X-ray study on layered structure of injection-molded PP
注射成型PP层次结构的X射线研究
14.
DESIGN OF INJECTION MOLDING MACHINE OF POM ZIPPER WITH MULTICOLOR AND ASSORTED COLOR
多色混色POM注塑拉链注射成型机设计
15.
Generation Mechanism of Internal Stress during Liquid-Solid Conversion of Col loidal Injection Moulding
陶瓷胶态注射成型液固转变过程中内应力产生机制初探
16.
Shear Induced Interfacial Morphology Development of Polypropylene During over-Injection Molding
二次注射成型聚丙烯中剪切诱导连接界面的形态演变
17.
The Molding Technological Research of Large-scale Vehicle Plastic Parts
大型汽车用塑件的注射成型工艺研究
18.
Optimization of the Gas-Assisted Injection Molding Process for the Typical Automotive Plastic Parts
典型汽车注塑件的气辅注射成型工艺优化研究