1.
Crankshaft Journal Size Paint Location
曲轴颈部尺寸标记位置
2.
Undersize crankshaft main bearing journals.
尺寸小于标准的凸轮轴主轴承轴颈。
3.
Use to add an angular dimension with dimension arrows that point inward.
用于添加指向内部的尺寸箭头的角度尺寸。
4.
Tie a cord around the waist and let it settle at the narrowest part. Take this measurement firmly
用卷尺围量腰部最细处。尺寸要量得紧些。
5.
Use to add a single horizontal dimension with dimension text outside extension lines.
用于添加一个尺寸文本位于延长线外部的水平尺寸。
6.
Layout inspection is the complete measurement of all product dimensions shown on the design records.
全尺寸检验是对设计记录中有的所有零件的尺寸要全部进行测量.
7.
The landmark is the iliac crest, which is positioned approximately 10cm below the waist. This is a critical measurement for tight skirts.
髋骨的顶部量至腰节以下10cm处。对紧身裙来讲,该尺寸是关键的尺寸。
8.
Use to add an aligned dimension with equal length extension lines and dimension text outside the extension lines.
用于添加延长线长度相等、尺寸文本位于延长线外部的对齐尺寸。
9.
Use to add an aligned dimension with unequal length extension lines and dimension text outside the extension lines.
用于添加延长线长度不等、尺寸文本位于延长线外部的对齐尺寸。
10.
Modular units for machine tool construction--Slide units--Dimensions
GB/T3668.4-1983组合机床通用部件滑台尺寸
11.
Rescale scene's root node to unit size
重放缩场景根部节点到单位尺寸
12.
The name, size and quantity to he cut of each section.
名称、尺寸以及每一部分要裁剪的数量。
13.
Accurate Distribution of Planar Dimensional Chain(Part 2. Probability Method)
平面尺寸链的精度分配 部份2:概率法
14.
full size drawing
原尺寸图，实物尺寸图
15.
foot in the door technique
得寸进尺法得寸进尺法
16.
High voltage post insulators of ceramic material Part 2: Dimensions and characteristics
GB/T8287.2-1999高压支柱瓷绝缘子第2部分：尺寸与特性
17.
Parallel shank twist drills--Part 3: The types and dimesnions for parallel shank jobber series twist drills
直柄麻花钻第3部分:直柄麻花钻的型式和尺寸
18.
Modular units for machine tool construction--Wing bases for slide units--Dimensions
GB/T3668.6-1983组合机床通用部件滑台侧底座尺寸