1.
The Meso-mechanism and Macroscopical Models of Ductile Failure in Pressure Vessel and the Relation between Them and Stress-State;
压力容器材料两种韧性断裂形态的分析研究
2.
Fractography Analysis on Dynamic Fracture in Rock
岩石动态断裂耗能机制的形貌学分析
3.
The Relationship between Present State of Stressin Part of Active Faults Plane and TheirUnsteady Form in Southwest China
西南部分活动断裂面上现今应力状态与断裂失稳变形的关系
4.
Cracking,Closing and Surpassing--An Analysis of the Ideology in the Film of Crash;
断裂、弥合与超越——《撞车》中的意识形态分析
5.
Dependece of Fracture Surface Morphology on Velocities in Fast Fracture of PMMA;
高速破坏的PMMA断裂表面形态与裂纹速度的相依关系
6.
Dynamic Fracture of a Cylindrical Interphase Crack under Torsional Load
圆柱形界面相裂纹在扭转载荷作用下的动态断裂
7.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
8.
The results indicated that the fracture mode is the fatigue failure.
结果表明，其断裂形式为弯曲疲劳断裂。
9.
The results show that the fracture surface is characterized by a combination of most intergranular brittle regions and a few cleavage regions, and there are finer precipitations on grainboundaries.
结果表明，成型模裂纹断口形态呈沿晶特征，沿晶面上有细小析出物，为脆性断裂。
10.
The mechanism of the injury was analyzed based on the site,cuntour, and cause of rupture of ICL.
根据术中韧带断裂的部位和形态，结合伤因分析其受伤机制。
11.
Investigation on KIC of As-Deposited Ti-6Al-4V Alloy Fabricated by Laser Solid Forming
Ti-6Al-4V合金激光立体成形沉积态的平面应变断裂韧度
12.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
13.
The composite displays the fracture features of the dimple and intergranular fracture.
复合材料的断裂形貌为韧窝加沿晶断裂。
14.
Impact Fracture Curve and Fractured Surface Morphology of PA 6/POE Blends
PA 6/POE冲击断裂曲线及断面形貌
15.
Deformation and Fractue of Micro─Zone Adjacent to Interface in Steels ──Ⅱ─Deformation and Fracture in Region Adjacent to Interface between Phases
钢中近界面微区的形变与断裂──Ⅱ─相界面近区的形变与断裂
16.
The Studies on the Dynamic Fracture and Fragmentation of Metal Freely Expanding Ring Driven by Electromagnetically Loading;
电磁加载下金属膨胀环的动态断裂与碎裂研究
17.
Study on Mechanism and Criterion for Brittle/Ductile Fracture and Theory of Crack-tip Deformation;
脆性/韧性断裂机理与判据及裂尖变形理论研究
18.
Prediction of radial crack of the workpiece during the splitting spinning based on ductile fracture criteria
采用韧性断裂准则预测分形旋压径向开裂