1.
The analysis and calculation of mobile tortuous bar in pre-torturing process;
汽车悬挂扭力杆预扭强化的分析与计算
2.
The Special Function Research of Torsion Rod Spring in Independent Suspension;
汽车独立悬架中扭力杆的特殊功能分析与研究
3.
Ensure the torsion bar is fitted in the correct position to prevent contact with the suspension frame.
确保扭力杆安装在正确的位置以防止与悬架摩擦。
4.
Research on Relations of Installation Torque and Anchoring Force of Self-screwed Bolt
自旋锚杆安装扭矩与锚固力关系研究
5.
Drill Pipe Tong Performance Analysis and the Research of Moment of Torsion Monitors and Contorls System;
钻杆动力钳性能分析与扭矩监控系统的研究
6.
Measurement and Study on Screw Torque and Axial Thrust of Twin Screw Pulping Extruder
双螺杆磨浆机螺杆扭矩和轴向推力的测量与研究
7.
OPTIMUM DESIGN OF AUTOMOTIVE SUSPENSION AND TORSION BAR SPRING
汽车扭杆悬架及扭杆弹簧的优化设计
8.
The only load to be applied to the torsion bar is the torque M at its ends.
扭杆上的唯一载荷是扭杆两端的扭矩M。
9.
Calculation of internal forces of framed flexible supporting structure with prestressed anchors based on torsional effects among beams and columns
基于梁柱扭转效应的框架预应力锚杆柔性支护结构内力计算
10.
The degree or angle of torsional stress.
扭力的强度，扭力的角度
11.
Sometimes, however, the ability of bars to deform appreciably in torsion is put to good use.
但是，有时要利用杆件在扭转时具有可观变形的能力。
12.
COMBINED TORSIONAL AND FLEXURAL BUCKLING OF A THIN-WALLED BAR ON ELASTIC SUPPORTS UNDER AXIAL LOADS
多弹性支承薄壁杆在轴向力作用下的弯扭联合屈曲
13.
restrained torsion of thin walled bar
薄壁杆件的约束扭转
14.
Graffiti was scrawled on some of the planks.
有些栏杆上歪歪扭扭刻着字。
15.
The state of being twisted into a spiral;torsional stress or strain.
螺旋状，扭力扭成螺旋状；扭转的压力或张力
16.
Torsional microslip at the clamps results in spurious torques which act like pivot friction torques.
夹紧处扭杆的微小滑移会产生干扰力矩，它的作用和轴颈的摩擦力矩一样。
17.
Shear stresses and shear strains in prismatic members may be caused by either torsional moments, or by shear forces associated with flexure.
在等截面杆件中，剪应力和剪应变可以由扭矩引起，或者由变曲相关的剪力引起。
18.
Controlling the Pitch of Automobile Body When Braking by Means of Adjusting the Pre Fastened Angle of Torsion Bar Suspension
调节扭杆悬架预扭角控制汽车纵向角振动