1.
High Speed Acidic Electroplating Technology of Compact and Bright Sn and Sn-Cu Alloy for Copper Wire
铜线材酸性高速电镀致密光亮锡、锡铜合金
2.
Research of magnetron sputtered Al-Mg alloy coatings on high-speed electro-galvanizing steel
在高速电镀锌钢板表面磁控溅射铝镁合金
3.
Nano PTFE in Ni composite coatings by high speed jet electrodeposition
纳米PTFE粒子细化高速电喷镀镍基复合镀层的组织
4.
The Plating Ration and Life-Span Study of Acidic System and High Phosphorus Solution of Electroless Plating;
酸性体系高磷镀层化学镀液镀速与寿命的研究
5.
Microstructure and high temperature oxidation resistance of nano-ZrO_2/Ni composite coatings prepared by high speed jet electroplating
高速电喷镀纳米ZrO_2/Ni复合层组织及高温氧化性能
6.
Factors Affecting the Deposition Rate of Poised Electro-Brush Plated Nickel Coating
脉冲电刷镀镍中沉积速度的影响因素
7.
The Pd membrane prepared by the modified electroless plating has a high H2 permeation rates, meantime exhibits a good H2 selectivity.
由无电子电镀过程制备的钯膜对氢渗透速率高，对氢有良好的选择性。
8.
Study on the Ni/nano-SiC Composite Coating Made by Fast Frequency Pulse Electroplating;
高频脉冲电镀镍基纳米SiC复合镀层的研究
9.
Electroplating Al Coating in Molten Salt and High Temperature Oxidation Process;
熔融盐电镀铝及镀铝层高温氧化的研究
10.
Corrosion Behavior of High-frequency Pulse-deposited Nano-crystalline Ni Coating;
高频脉冲电镀纳米晶镍镀层腐蚀行为研究
11.
Analysis on Microstructure and Hardness of Brush Plating Coating on High Temperature Resistance Alloy
耐高温合金电刷镀镀层显微组织及硬度分析
12.
Research and Development on Digital Soft-switching Electroplating Power Supply Based on DSP;
基于DSP的数字化软开关高频电镀电源
13.
Application of New and High Technique in Electroplating for Printed Circuit Board
高新技术在印制电路板电镀中的应用
14.
The effect of RTA process on optical and electrical characters of E-beam evaporated ITO films
快速热退火对电子束蒸镀的ITO膜光电特性影响
15.
Comparative Analysis of Zinc Coat and Zn-Al Alloy Coat in Highway Fence
高速公路隔离栅热浸镀锌和锌铝合金镀层的对比分析
16.
It was proved thet the pooperties of the bath is stable,the deplsition rate is considerably high,the edposited layer possess fairly high hardness and good adhesive power to the substrate.
试验结果表明:镀液性能稳定,镀层沉积速度快,镀层硬度高、质量好、结合强度大。
17.
Study on Process and Equipment of Rapid Manufacture Electroplate Diamond Wire Saw
电镀金刚石线锯快速制造工艺及设备的研究
18.
Rapid Restoration of Scuffed Surface of Aircraft Parts Made of Hard-Aluminum Alloy by Brush Electroplating
飞机硬铝构件表面划伤的电刷镀快速修复