1.
Shell core and cold box coremaking are the main technique at present.
目前制芯工艺主要采用壳芯和冷芯盒制芯技术。
2.
Defects Analysis and Control Technique of Cold-box Core
冷芯盒制芯工艺缺陷原因分析及其控制技术
3.
Study on the Tri-ethylamine Cold Box in Core-Making for the Casting of Cylinder Body and Head;
用于缸体、缸盖生产的三乙胺法冷芯盒制芯工艺研究与应用
4.
Abstract Based on domestic materials used in the Phenolic Urethane Cold Box Process( PUCB), the relationships between coremaking parameters and the properties of cores have been studied.
在立足于国产制芯原材料的基础上，研究了三乙胺冷芯盒工艺对砂芯性能的影响。
5.
Study of the Process and Mechanism on a New CO_2-Cured Phenol-Formaldehyde Resin with Cold-Core Box Material Used in Foundry;
铸造用新型CO_2硬化酚醛树脂冷芯盒材料工艺及机理的研究
6.
In this paper, Seveal typical samples of the pneumatic control, liquid TEA providingand the gassing methods for the spraying gassing unit are proposed.
本文介绍了冷芯盒制芯用喷射式气雾发生器气源控制、法供应及雾化方式的几种典型形式。
7.
plain-frame core box
框架式芯盒，框形芯盒
8.
core box, used in the preparation of sand moulds
型芯盒,用于制备砂型
9.
The Study on 80 Fuel Assemblies Core for HFETR
高通量工程试验堆80盒元件堆芯研究
10.
Design and Realization of IPTV STB Based on AVS Decoding Chip DS1000
基于AVS解码芯片DS1000的IPTV机顶盒设计
11.
condenser with fused inner tube
直形内芯封口冷凝管
12.
solublecored oil cooling gallery
可溶性型芯油冷通道
13.
Application of Cold Box Core Process for Modern Lean Cast
应用冷芯制芯中心,迈向现代精益铸造
14.
Figure 2.1 illustrates the use of draft on a typical pattern and corebox.
图2.1 说明了起模斜度在一个典型的模样和芯盒
15.
Cigarette case . cotton-core and flint.
另外还有精品香烟盒、棉芯和火石等配置。
16.
The Design and Implement of STB Based on the Chip of STx5105;
基于STx5105芯片的数字电视机顶盒设计与实现
17.
Study on the Technology of Nylon Core Box for Sand Casting Based on Rapid Prototyping
砂型铸造用尼龙芯盒激光快速成型技术研究
18.
The Research and Design of the Core Chip of the Digital TV Cable Set-top Box
数字有线电视机顶盒核心芯片的研究与设计