1.
Study on the Effects of the Fusing Parameter on the Bonding Strength of Titanium-porcelain
烤瓷烧结参数对钛—瓷间结合强度影响的研究
2.
Effect of Sintering Parameters on Properties and Microstructure of Mo-Cu Alloys
烧结参数对钼-铜合金组织和性能的影响
3.
Effect of the sintering parameters on (Ba_(0.6)Sr_(0.4))TiO_3-MgO composite ceramics
烧结参数对(Ba_(0.6)Sr_(0.4))TiO_3-MgO复合陶瓷的影响
4.
Influence of Sintering Parameters on Performance of Powder Metallurgy Cr13 Stainless Steel
烧结参数对粉末冶金Cr13型不锈钢性能的影响
5.
Analysis of Powder Sintering Parameters Optimal Control System Based on DLMS
基于DLMS技术粉末烧结参数优化控制系统分析
6.
Effects of Processing Parameters in Vacuum Sintering on Properties of Cu Powder Samples
真空烧结工艺参数对铜粉烧结性能的影响
7.
EXPERIMENTAL STUDY ON STRUCTURE PARAMETER OPTIMIZING OF MICRO-COMBUSTOR WITH PENETRATION COMBUSTION
壁面渗透燃烧微燃烧器结构参数优化实验研究
8.
Processing Parameters Influencing Precision of the Parts Produced by Selected Laser Sintering
影响选择性激光烧结精度的工艺参数
9.
Determination of TiAl/B4C Composite Ceramic Sintering Process Parameters
TiAl/B_4C复合陶瓷烧结工艺参数的确定
10.
Study the Influence Raw Composition and Sinter Craft Parameter on Sinter Phase Structure and Strengh;
原料组成和烧结工艺参数对烧结矿相结构及强度的影响研究
11.
The Mathematical Statistic Analysis of Experiments on Structural Parameters Selection of Combustion Chambers
燃烧室结构参数调整试验的数理统计分析
12.
THE EXPERIMENTAL RESEARCH ON SINTERING TEMPERATURE TO Fe_2O_3 POWDER SINTERING DENSITY
烧结温度等参数对Fe_2O_3粉末烧结密度影响的试验研究
13.
Study on Sintering Parameters of Hematite Concentrate With 600mm Deep Bed at East Anshan Sintering Plant of AISC
鞍钢东烧厂600mm料层厚度赤精矿烧结工艺参数研究
14.
The most important of the results is the finding of significant axial variations of the combustion parameters.
最重要的结果是燃烧参数的轴向变化显著。
15.
Investigation on the Optimizing Range of CombustionChamber Configuration Parameters of DSCS
双卷流燃烧室结构参数优选范围的研究
16.
Study on Theory of New Type Sinter Chain Design and Parametrization;
新型带式烧结机设计理论研究及其参数化
17.
Effect of Taisteel Sintering Process Parameters on Flue Gas Composition Variation
太钢烧结过程参数对烟气成分变化的影响
18.
Influence of Processing Parameters on Precision of Parts Made by Selected Laser Sintering
工艺参数对选择性激光烧结制件精度的影响