1.
The melting consistency of two cores is influenced by electrode type, welding current etc.
研究表明,双电极焊条两焊芯熔化的一致性受焊条类型、接电流等因素的影响。
2.
High-temperature Oxidation Behavior of Deposited Metal for New Ni-base Flux-cored Wire
新型镍基药芯焊丝熔敷金属的高温氧化行为
3.
The board and chip are then heated to melt the solder and join the two together.
然后加热面板和芯片的缝合处,使焊锡熔化,从而把二者粘在一起。
4.
With the result the coating projects beyond the molten end of the electrode metal.
结果药皮伸延于焊条金属芯熔端之外。
5.
Ti content on diffusible hydrogen of deposited metal of flux cored wire
钛对药芯焊丝熔敷金属扩散氢的影响
6.
AC gas metal-arc welding process
交流熔化极气保护焊
7.
parent metal fusion
焊接基体金属的熔化
8.
The Study on Metal Transfer and Operation Performance of Rutile Gas Shielded Flux-cored Wire;
钛型气保护药芯焊丝熔滴过渡及其工艺性研究
9.
Effect of Ti content on microstructure toughness of deposited metal with flux cored wire
钛对气保护药芯焊丝熔敷金属组织韧性的影响
10.
Study on welded metal properties of high carbon cast self-shielded flux cored wire with Nb and Mo
Nb和Mo对高碳自保护药芯焊丝熔敷性能
11.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
12.
GMAW short-arc tack welds shall not be incorporated into the root pass.
熔化极气体保护焊-短弧点焊焊缝不能与根部焊道合成一体。
13.
Effect of Droplet Transition on Rapid Prototyping by P-MIG
熔滴过渡对脉冲熔化极氩弧焊快速成形的影响
14.
Design of Weld Tracking Self-Adaptive Fuzzy Controller in Consumable Electrode Arc Welding
熔化极电弧焊焊缝跟踪自适应模糊控制器设计
15.
Design of Dust Cleaning Equipment of Twin Deposition Electrode Arc Welding;
双熔敷极焊条电弧焊除尘净化设备设计
16.
Numerical Simulation on Residual Stress Fields and Temperature Fields of Weld Joint in the Process of Fusion Welding
熔化焊焊接接头的温度场和应力数值模拟
17.
Stability of Double Wires Narrow-gap Gas Metal Arc Welding
双丝窄间隙熔化极气体保护焊的焊接稳定性
18.
Effects of Several Components on the Toughness of Deposited Metal and Usability of Self-shielded Flux Cored Wire;
几种组分对自保护药芯焊丝工艺性能和熔敷金属韧性的影响