1.
Investigation on the Limit and Burst Pressures for the Vessels with Nozzle;
带接管压力容器极限压力及爆破压力的研究
2.
Low ultimate pressure, high pumping speed for Ar.
极限压力低、抽气压力范围宽，对氩气抽速较高。
3.
Engineering modeling of limit pressure for pipe containing defects
含缺陷管道极限压力的工程计算模型
4.
Finite Element Method to Calculate Extreme Pressure of Internal Corroded Pipeline
基于有限元的内腐蚀管道极限压力计算
5.
Normal ratings( pressures, temperatures, time setting, etc.) shall be durably marked.
译:正常极限.压力.温度.时间.将执久标示.
6.
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
7.
Power Transmission Tower Angli Iron Bar Critical Load of Compressive Member;
送电铁塔单角钢受压极限承载力研究
8.
Estimation of ultimate load for a screw pile under the vertical pressure
竖向承压螺旋桩基础极限承载力判定
9.
Ultimate Bearing Capacity of FRP-Concrete Stub Columns under Axial Compression
FRP-混凝土轴压短柱的极限承载力研究
10.
The Research on Finite Element Plastic Limit Analysis Method Subjected to Pore Water Pressure;
考虑孔隙压力的有限元塑性极限分析法研究
11.
UPPER BOUND SOLUTIONS OF LIMIT ANALYSIS FOR LATERAL PRESSURE OF SQUAT SILOS
浅圆仓散料侧压力的极限分析上限方法
12.
Analysis of Prestressed Subassemblage Concrete Frame on Load-Bearing Capacity;
预压装配式预应力混凝土框架极限承载力分析
13.
Calculation of the laying-up diameter of LV power cables by the gradual degeneration method
两端极限法计算低压电力电缆成缆外径
14.
Limit and Shakedown Analyses of 3-D Defective Pressurized Pipelines;
三维含缺陷压力管道的极限与安定分析
15.
Numerical Limit and Shakedown Analyses of the Pressure Vessels with Part-Through Slots;
含凹坑缺陷压力容器极限与安定性数值分析
16.
Research on Reasonable Blank-Holder Force and Deep-drawing Limit of a Conical Part;
圆锥形零件极限拉深系数及合理压边力的研究
17.
Ultimate Compressive Strength Study on Gusset Plate Connections to Slotted Tubes and Full-scale Experiment Research;
管板节点受压极限承载力分析及足尺试验研究
18.
Research of Ultimate Compressive Bearing Capacity of Circular Tubular Y-Joints Reinforced with Doubler Plate;
垫板加强Y型圆钢管节点受压极限承载力研究