1.
Dynamic simulation on thermal processes of flat-plate solar collector based on high temperature refrigerants R245fa
基于高温工质R245fa的太阳能平板集热器集热过程动态模拟
2.
Working Fluids for the Moderate and High Temperature Heat Pump Based on Conventional R134a Heat Pump System
基于R134a常温热泵系统的中高温热泵工质的研究
3.
Analysis of Gasification from Biomass Using High Temperature Air and Development of High Temperature Air Preheater;
生物质高温空气气化工艺过程分析与高温空气发生器的研制
4.
Producing high-quality flavor vinegar by the process of liquid-high-temperature saccharification and solidalcoholization,acetification
液态高温糖化——固态酒化醋化工艺生产优质香醋
5.
Working Fluids and System Optimization of Moderate/High Temperature Heat Pump;
中高温热泵工质及系统优化方法的研究
6.
MEASURED PERFORMANCES OF THREE WORKING FLUIDS IN MODERATELY HIGH-TEMPERATURE HEAT PUMPS
三种中高温热泵工质循环性能实验研究
7.
Experimental Study on the Characteristics of High-temperature Chilled Water System Using R134a as Working Fluid
以R134a为工质的高温冷水系统性能实验研究
8.
Study on process of improving cast-rolling strip quality by temperature lowering and speed increasing
降温提速提高铸轧带材质量的工艺研究
9.
Analysis of Characteristics of Different Working Fluids for Gas Turbine Cycle with High Temperature Gas-Cooled Reactor
高温气冷堆气轮机循环的不同工质特性分析
10.
The mass concrete construction quality control in high temperature and drought area
高温干旱地区大体积混凝土施工质量控制
11.
Quality Control Measures in Beam Prefabrication under High Temperature
高温条件下梁体预制混凝土施工质量控制措施
12.
Selection of working fluids for high temperature heat pipes used in dish solar receivers
用于碟式太阳能接收器中高温热管工质的选择
13.
The construction quality control of mass concrete during high temperature period
高温期间大体积混凝土施工质量的控制
14.
Brittleness Analysis of Cr5Mo Face the Hydrogen High-temperature Heterogeneity Joints of the Processing Pipeline
Cr5Mo临氢高温工艺管道异质接头脆化机理分析
15.
Physical Design of QWR Cavity, Cryostat and ISOL High Mass Resolution Spectrometry for BRIF Project;
BRIF工程QWR腔、低温恒温柜和ISOL高质量分辨谱仪物理设计
16.
Investigation on Cyclic Characteristics of Zeotropic Mixtures in Moderate and High Temperature Heat Pumps According to the Relation between Temperature and Enthalpy;
基于温焓关系的中高温热泵非共沸工质的循环特性分析
17.
Research on Surface Quality of Superalloy GH4169 Machined by ECM & EDM;
高温合金GH4169电解加工和电火花加工表面质量研究
18.
High-quality working liquid, ensure all-weather adaptability under different temperature conditions.
高品质工作液，确保高低温环境下全天候产品适应性。