1.
Research on ANN|Based Prediction Model Used to Estimate the End|Quench Curves of Structure Steels
基于人工神经网络的结构钢端淬曲线预测系统模型的研究
2.
Steel - Hardenability test by end quenching(Jominy test)??
钢端头淬火的淬透性试验（乔米尼试验）
3.
Research on Dynami Characteristic of Machining Hardened Die Steel on Curve Profile with Micro-End Mill;
小直径铣刀加工淬硬钢曲线轮廓动力学特性研究
4.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床
5.
Multidegree Reduction of Bézier Curves with Conditions of Endpoint Interpolations
带端点插值条件的Bézier曲线降多阶逼近
6.
The Bezier spline is always anchored at the two end points.
贝塞尔曲线总是锚定在两个端点。
7.
Bend the end of the wire back.
将这根金属线的末端向后挠曲。
8.
Mathematic Deduction of the Properties of NURBS Curves at the Beginpoint and the Endpoint;
NURBS曲线端点性质的数学推导
9.
continuous quench and temper line
淬火回火连续作业线
10.
Curved line with an arrowhead at either end. Use the control handle to resize the line ends.
两端都带有箭头的曲线。使用控制手柄可调整端点形状的大小。
11.
Crank the engine for 5 seconds while monitoring the voltage at the coil positive terminal:
用曲柄发动引擎5秒钟，监视线圈正极端子电压：
12.
Curve A is skewed to the right, because it tails off toward the high end of the scale.
曲线A向右倾斜，因为它的尾部摇向高值一端。
13.
It is also required to discover and trace the curve containing all such points.
也要求发现并描出这条包括所有端点的曲线。
14.
Digital design of cylindrical end cam based on curve fitting and correction
基于曲线拟合修正的圆柱端面凸轮数字化设计
15.
Design of Cross Section for Counter-Rotating Twin-Screw Elements and Surface Reconstruction;
双螺杆挤出机端面曲线设计理论的研究与曲面重建
16.
A plane cubic curve having a single loop, a node, and two ends asymptotic to the same line.
平面立方曲线平面的立方曲线，具有一个拱形、一个交点和逐渐接近同一条线的两个端点
17.
The control points act as" magnets" to pull the curve away from the straight line between the two end points.
控制点承担“磁铁”的角色，它把曲线拉离两个端点之间的直线。
18.
Study on the Curve Radius Standards for the Divergent and Main Lines in and Adjoining Stations on High-speed Railway
京沪高速铁路车站内及站外两端的正线曲线半径标准的研究