1.
Analyzing the Metal Moving and Designing the Mould in the Continuous Extrusion Extended Figuration;
连续挤压扩展成形金属流动分析与模具设计
2.
Contrast analysis of extending forming between continuous extrusion and forward extrusion
连续挤压与正挤压在扩展成形中的对比分析
3.
Numerical simulation on copper bus-bar under large extending ratio for continuous extrusion process
铜母线大扩展比连续挤压成形过程的数值模拟
4.
To shape(a plastic, for instance) by forcing it through a die.
挤压出用一模子把（如塑料等）挤压成形
5.
Study on frictional effect between extrusion container and billet in forward extrusion forming
挤压筒摩擦对正挤压成形影响的研究
6.
a concavity in a surface produced by pressing.
由于挤压而形成的凹陷。
7.
Influence of backward extrusion punch shape to the extrusion process
反挤压凸模形状对挤压成形工艺的影响
8.
bradenhead squeeze pressure
关闭井口套管闸门形成的挤压压力
9.
Technological Analysis and Cold Extrusion of Two-exit Components with Ring Shape
两出口环形件的冷挤压成形工艺研究
10.
The cable made up of strands is squeezed into a circular shape.
将钢丝束组成的缆挤压成圆形。
11.
CAD System Research of Side hydraulic Pressune Jar in Extrusion Modeling Presses Based on SolidWorks
基于SolidWorks挤压成形液压机侧液压缸CAD系统研究
12.
Plastic material is extruded through very small holes to form fibres.
塑料从细孔挤压出来形成纤维。
13.
By use extrude granulator to make soft material into strip granules.
软材通过挤压制粒机制成条形状颗粒。
14.
Research on Micro-extrusion Forming of H62 and Its Size Effects;
H62黄铜微挤压成形及其尺寸效应研究
15.
The Study on Thin-Wall Tube Extrusion Forming Technology of Magnesium Alloy AZ31;
AZ31镁合金薄壁管材挤压成形工艺研究
16.
The Simulation of Cutting-Extruding Process and the Programming of Visual;
切削—挤压成形过程仿真及可视化编程
17.
Research on Warm Extrusion of Gear Shaft Base on FEM Technology;
基于FEM技术的齿轮轴温挤压成形研究
18.
The Study on Tube Extrusion Forming Technology of Magnesium Alloy AZ31;
AZ31镁合金管材挤压成形工艺研究