1.
Frictional heat influenced by the surface pits of piston-cylinder
表面凹坑对活塞-缸套摩擦生热过程的影响
2.
The Surfice Pit Detection of Artificial Marble Based on Machine Vision
基于机器视觉的人造大理石台板表面凹坑检测
3.
The surface cratered with the constant dropping of water.
表面因长年不断地滴水而成坑凹。
4.
The Effects of Surface Dent Depth on the Micro Elastohydrodynamic Lubrication
凹坑深度对表面动态弹流润滑的影响
5.
Drag Reduction by Dimples on Surfaces in Plane-plane Contact Lubrication
凹坑表面形貌在面接触润滑状态下的减阻研究
6.
The small pits that form on the surface act as stress raisers.
在表面形成的小凹坑起到应力增高源的作用。
7.
Study of the Reducing Resistance and the Genetic Optimization of the Pit Bionic Non-smooth Surface;
凹坑形仿生非光滑表面减阻和遗传优化研究
8.
Study of Drag Reduction Capability of the Dimple Bionic Non-smooth Surface;
凹坑形仿生非光滑表面的减阻性能研究
9.
Research on Tribological Properties of the Laser-Textured Surface with Micro-pores;
激光微造型凹坑表面形貌摩擦特性的研究
10.
Drag Reduction Effect of Dimple Concave Surface in Air
凹坑形表面在空气介质中的减阻性能研究
11.
Simulation on Flow Control for Drag Reduction of Revolution Body Using Bionic Dimpled Surface
旋成体仿生凹坑表面流场控制减阻仿真分析
12.
Investigation on the Surface of Planar Friction Pair with Micro-dimples Array Generated by Electrochemical Pattern Transfer
电解转印加工平面摩擦副表面微小凹坑阵列的研究
13.
Thermal-Structural Analyze of Concave Bionic Non-smooth Surface and Study of Its Abrasion Resistance Capability
凹坑型仿生非光滑表面的热结构分析及耐磨性的机理研究
14.
Numerical Simulation of Fluid-Solid Coupling for Lubricating Oil Extrusion Process Between Cylinder and Piston with Micro-pits
凹坑表面活塞与缸套挤压润滑油的流固耦合数值模拟
15.
Design and Test of Special Machining for Micro-pits of Working Surface Between Friction Pairs
摩擦副表面圆形微凹坑特种加工工艺设计与试验
16.
An indentation or small hollow.
凹处凹陷处或小洞小坑
17.
Transient infrared heat transfer measurements and surface flow visualization on a single dimpled wall
单凹坑壁面的瞬态红外传热测量与流场显示
18.
A slight depression or indentation in a surface.
凹痕表面上轻微的下陷或凹陷