1.
Preparation of One-component Moisture Curing Polyurethane Adhesive with Long Open Time
长表干时间单组分湿固化聚氨酯胶黏剂的制备
2.
Two components, transparent epoxy primer varnish. May be moistly dried.
透明双组分环氧清漆，可潮湿固化。
3.
The Manufacture of a Novel One-part Form Epoxy Adhesive at Room Temperature;
一种新型单组分室温固化环氧胶粘剂的研制
4.
inherent moisture
固有湿度,固有水分
5.
Clear, low viscosity, one-component, rigid, heat cure epoxy system which exhibits high heat resistance.
透明的低粘度单组分加热固化环氧树脂，坚硬，高抗热性。
6.
Mechanical Properties of One-Component Visible-Light Curing Orthodontic Adhesive
单组分可见光固化齿科正畸粘接剂力学性能研究
7.
Microstructure Analysis of Solid Products of Wet Biomass Catalytic Gasification with CO_2 Absorption
湿生物质催化气化固体产物的微观结构分析
8.
Investigation on the Stacks of Single Chamber Solid Oxide Fuel Cells;
单气室固体氧化物燃料电池组的研究
9.
Coking Coal Moisture Control with Particle Segregation in Fluidized Moving Bed;
炼焦煤气固流化—移动床调湿分级工艺研究
10.
wet surface hardenable adhesive
潮湿面可固化胶粘剂
11.
moisture cured urethane coating
湿固化氨基甲酸酯涂料
12.
Perianal Condyloma Acuminate Treated by MTC Associated with CO_2 Laser and Interferon Injection
微波组织凝固联合二氧化碳激光、干扰素等治疗肛周尖锐湿疣
13.
Catalytic wet air oxidation of main components of landfill leachate
垃圾渗滤液主要组分的催化湿式氧化降解
14.
Clear, one-component, flexible, heat cure epoxy system designed for coil impregnation, and potting applications requiring low viscosity and minimal thermal stress.
透明的单组分加热固化环氧，弹性，专为低粘度、最小热压的灌封浇注要求而设计。
15.
Solid-Liquid Separation Solid-liquid separation processes make up a key group of the unit operations. Some of them are extremely old, dating back thousands of years.
固一液分离过程构成了一组重要的化工单元操作，其中有的非常古老，可以追溯到数千年以前。
16.
Study of one-part polyurethane sealant with fast curing speed and high hardness
快固高硬度聚氨酯单组分密封胶的研究
17.
Study on creep of one component polyurethane adhesives for green wood gluing and glulam
湿材胶合用单组分聚氨酯胶黏剂及其胶合木蠕变性能研究
18.
Two components, zinc-rich epoxy-polyamide primer.
双组分，聚酰胺固化环氧富锌底漆。