1.
Study on Damping Behavior of Particulates Reinforced Al Matrix Composites Fabricated by Spray Atomization and Codeposition
喷射共沉积颗粒增强铝基复合材料阻尼特性的研究
2.
The Spray Deposition Technology for the Preparation of 7075/SiCp Composites with Large Dimensions and Following Processing Issues;
大尺寸7075/SiCp复合材料的喷射共沉积制备技术及后续加工问题研究
3.
The Research on the Microstructure and Mechanical Properties of Spray Co-deposited 7090/SiC_p Composites;
喷射共沉积7090/SiC_p复合材料微观组织及力学性能研究
4.
Microstructure and Mechanical Properties of Spray Deposition SiCp/2024 Al Matrix Composite Rolling Plate
喷射共沉积SiC_p/2024铝基复合材料轧板的显微组织及力学性能
5.
Researches of Microstructues and Properties of Spray Deposited Al11.3Zn2.4Mg1.1Cu Alloy;
喷射沉积Al11.3Zn2.4Mg1.1Cu合金组织及性能研究
6.
Jet-Electrodeposition of Co-Ni Alloys and Their Thermal Stability;
Co-Ni合金的喷射电沉积及其热稳定性
7.
The Microstructures and Mechanical Properties of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy
喷射沉积耐热高硅铝合金组织及性能
8.
Intelligent Control for Forming Process of Cylindrical Spray Deposition
柱状喷射沉积坯成形过程的智能控制
9.
Study the Densification Process of Spray Deposited GCr15 Alloy
喷射沉积坯GCr15合金的致密化研究
10.
Simulation for Cathodic Electric Field Intensity in Jet Electrodeposition
喷射电沉积阴极电场强度的仿真研究
11.
Research of Microstructure of Spray-deposited High Si-Al Alloy
喷射沉积高硅铝合金的显微组织研究
12.
Contrast between GCr15 steel sprayed blank and sprayed powder
喷射成形沉积坯与过喷粉末的比较分析
13.
Research on Simulation of Spray Forming Tubular Preforms and Control of Spray Height;
喷射沉积管坯的形貌模拟及喷射高度控制的研究
14.
Research on Jet Electrodeposition and Laser Remelting Nanocrystalline Nickel Coating;
喷射电沉积—激光重熔复合技术制备纳米晶镍沉积层工艺试验研究
15.
The Researches on Deformation and Fracture Behaviors of Porous Materials Prepared by Spray Deposition During Compression and Rolling;
喷射沉积材料压缩和轧制变形规律研究
16.
The Process and Mechanical Properties of High Silicon-content Aluminum Alloy by Multi-Layer Spray Deposition Technology;
多层喷射沉积高硅铝合金工艺及性能研究
17.
The Research on the Control System of the Spray Deposition Tubular and Tundish Level Control;
喷射沉积管坯控制系统及其液位控制研究
18.
Mathematical Simulation of Billet Profile Growing Process and Structure Prediction during Spray Forming Process;
喷射成形沉积坯生长过程数值模拟和组织预测