1.
(4)The parameter general post processor is adopted.
(4) 后置处理采用参数化的通用后置处理器；
2.
The Design of Postprocessor for Five-axis Machine Tool Based on UG/Postbuilder
基于UG/Postbuilder的五轴后置处理器设计
3.
The Secondary Development to the Post Processor of MasterCAM Based on SINUMERIK802D
基于SINUMERIK802D的MasterCAM后置处理器二次开发
4.
Research and Development on General Post-Processor of NC Progarmming;
数控加工编程通用后置处理器的研究与开发
5.
Development of NC machining simulation and programming system based on UG
基于UG的加工仿真及后置处理器的开发
6.
How to Deal with the Feed Rate in Designing the Post Processor System
后置处理器系统设计中进给速度处理方法的研究
7.
Carefully place the CPU into the socket.
最后再将中央处理器置入处理器插座中。
8.
processor memory management unit
处理机存储器管理装置
9.
Configures hard disk drives and volumes. The service only runs for configuration processes and then stops.
配置硬盘驱动器和卷。此服务只为配置处理运行，然后终止。
10.
Management and prognosis of implantable cardioverter defibrillator with electrical storm
埋藏式心脏转复除颤器安置后电风暴的处理与预后
11.
exhaust after-treatment device
废气后处理净化装置
12.
irradiated uranium reprocessing control assembly
辐照铀后处理控制装置
13.
Configuration Manager: Device interface is active.
配置管理器: 设备界面处于活动状态。
14.
Design and Implementation of Scalable FFT/IFFT Processor Based on FPGA
可配置FFT/IFFT处理器的设计及其FPGA构造
15.
Application of dsPIC33F microprocessor in microcomputer protection device
微处理器dsPIC33F在微机保护装置中的应用
16.
Developmental Environment Configuration of Porting RTEMS to SAILING698
RTEMS移植到SAILING S698处理器的开发环境配置
17.
Parallel and Reconfigurable ECC Application Specific Instruction-set Coprocessor
并行可配置ECC专用指令协处理器
18.
ASIC design of a high-speed reconfigurable RSA cryptography coprocessor
高速可配置RSA密码协处理器的ASIC设计