1.
RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS
压铸过程中铸件-铸型界面换热系数与铸件凝固速率的关系
2.
diamond-particle bit
潜铸型细粒金刚石钻头
3.
Study on Heat Transfer Coefficients at Metal/Mold Interface during Solidification in Metal Castings
金属型铸造凝固过程铸件/铸型界面换热系数的研究
4.
The actual volume of RV casts was determined by water displacement method.
右室铸型的实际容积由铸型排除水的体积计算 ;
5.
An Example of Recovery of Coated Die for Centrifugal Cast Small-Bore Pipes
涂料金属型离心铸造小口径管铸型再生一例
6.
Study and Application on the Cast Material of Crack Resistance Gypsum Mould and Equal Wall Thickness of Cast Mould
抗裂石膏型铸造材料及铸型等壁厚研究与应用
7.
We can also adopt sand shell moulding or metal mold casting as for allotype castings.
对异形铸件，还可用砂型铸造或金属型铸造。
8.
The Fatigue Property of As cast HCC Ductile Iron Bars
水平连铸铸态铁素体球墨铸铁型材的疲劳性能
9.
Moreover a factory also produces the metal mold casting, the centrifugal casting, the continuous casting and other casting and so on.
另外本厂还生产金属型铸造、心铸造、续铸造及其他铸造等。
10.
Rated-locking force is the main die-casting technology parameter of die-casting machine.
合型力是压铸机主要的压铸工艺参数。
11.
A Study on the Fatigue Strength of the Horizontal Continuous Casting Shape Gray cast Iron
水平连铸灰铸铁型材疲劳性能的研究
12.
The Numerical Simulation of the Horizontal Continuous Cast Iron Bar's Solidification;
铸铁型材水平连铸凝固过程数值模拟
13.
Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;
低压铸造铸件充型凝固过程数值模拟
14.
CAD System for Cylindric Magnesium Alloy Casting by Low Pressure Casting Process;
圆筒型镁合金铸件低压铸造工艺CAD
15.
INVESTIGATION ON THE MOLD FILLING CHARACTERISTICS OF GRAY IRON IN THE EPC PROCESS WITH UNBONDED SAND MOLDS;
灰铸铁干砂消失模铸造充型特性研究
16.
The Development of CAD System for Sand Casting of Steel;
铸钢件砂型铸造模具参数CAD软件开发
17.
Melting and Casting Process Investigations on Large Size Ingot of AA5182 Al-Mg Alloy;
AA5182大型Al-Mg合金铸锭熔铸过程研究
18.
Impact of Joint Face of Casting Die to Craft Character;
论压铸模分型面对铸件工艺性的影响