1.
In general, the deformation of the model grille is a combination of axial and shear strains.
一般情况下，模型栅格的变形是轴向应变和切向应变的组合。
2.
multiple beam lateral-shear interferometer
多光束横向切变干涉仪
3.
An Invesitigation of Small Strain Shear-Modulus Anisotropy Based on Experiments and Numerical Smulation
砂土小应变剪切模量各向异性试验研究及数值模拟
4.
Effect of Cutting Parameters on Chip Fracture Strain
切削参数变化对切屑断裂应变的影响
5.
STUDY ON CUTTING FORCE IN RECTANGULAR GROOVE CUTTING AND SIDE DEFORMATION OF CHIP
矩形槽切削的切削力及切屑横向变形的研究
6.
Effect of Orientation of Principal Stress on the Undrained Behavior of Saturated Sand under Monotonic Shearing
饱和砂土不排水单调剪切特性试验研究——考虑剪切过程中变化的总主应力方向的影响
7.
strain controlled direct shear apparatus
应变控制式直接剪切仪
8.
uniform strain shearing strengh tester
等应变剪切强度测试仪
9.
The mistaken tendency of "putting money above everything else"should be corrected
“一切向钱看”的错误倾向应当得纠正
10.
hypsochromic effect
色光变浅效应，向紫效应
11.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程
12.
Camera Calibration for Model Visualization with Tangential Distortion
带切向畸变的模型可视化摄像机标定
13.
The Relation between Light-wavelength Change and Tangential and Radial Velocity of Light Source;
光波波长变化与光源切向和视向速度的关系
14.
Image-guided stereotactic craniotomy for small intracranial lesions
影像导向立体定向开颅切除颅内小病灶病变
15.
If shear, torsional and axial deformations are to be taken into account, their effects must be added into the expression for internal work.
在计算中若考虑剪切、扭转及轴向变形，则其影响应该迭加到内虚乘积功的表达式中。
16.
All the decisions, which result in a change in life direction, are made in a state of silence and stillness.
一切的决定，产生改变生命方向的效应，都是在寂静的状态中而完成的。
17.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
18.
To become dull or blunt by bending back. Used of the edge of a cutting instrument.
使变钝因向后弯曲而变钝。用于切割工具的刃