1.
INFLUENCE OF POLYESTER MELT QUALITY ON SPINNABILITY OF DIRECT SPINNING POY
聚酯熔体质量对直纺POY可纺性的影响
2.
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
3.
Research on Pet Microfilaments by Melt Direct Spinning;
聚酯熔体直纺多孔细旦拉伸变形丝的研究
4.
Application of High Viscosity PET Melt Heat Exchanger in Direct Spinning
高黏度聚酯熔体热交换器在直纺中的应用
5.
Application of The bolt stretcher in tightening and disassembling polymer filter
螺栓预拉伸法在聚酯熔体过滤器螺栓装拆作业中的应用
6.
Study on Melt-spinning Polyurethane Based Hollow Fiber Membrane;
熔体纺丝法聚氨酯系中空纤维膜研究
7.
Grating of ε-Caprolactone onto Polypropene via Bulk-Melting/Surface Initiated Polymerization;
聚丙烯本体熔融/表面接枝聚已内酯的研究
8.
A Study on Phase-mixing of Poly(∈-caprolactone)/Poly(vinyl chloride)after the Melting of Crystals
聚已内酯/聚氯乙烯共混物晶体熔化后相混合情况
9.
Melt Grafting of Glycidyl Methacrylate and Multi-monomer Styrene onto Polypropylene Powder
甲基丙烯酸缩水甘油酯-苯乙烯多单体熔融接枝粉末聚丙烯
10.
Engineering Research in Prepolymerization Process of Polycarbonate Synthesis Through Melt Transesterification;
聚碳酸酯熔融酯交换法预聚过程的工程研究
11.
Study on the Synthesis of Bisphenol-A Co-Polycarbonate with Reduced Birefringence Through Melt Transesterification Process;
熔融酯交换法合成低双折射共聚碳酸酯的研究
12.
The yield, molecular weight, polar comonomer content and melting temperature of the poly(olefin-ester)s can be controlled by the change of polymerization reaction condition.
改变聚合条件，可控制烯烃共聚酯的分子量、极性单体插入率和熔融温度等性质。
13.
Study on direct melt polymerization of poly (lactic acid-co-caprolactone)
聚乳酸-己内酯直接熔融聚合工艺的研究
14.
polyester-polyamide alloy fibre
聚酯-聚酰胺混合体纤维
15.
Synthesis and properties of moisture curing aliphatic poly(ethylene carbonate)-based polyurethane hot melt adhesive
聚碳酸亚乙酯多元醇制备湿固化聚氨酯热熔胶及其性能研究
16.
The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.
醋酸乙烯酯共聚物用途广泛,可用炸弹性体、膜、沫、料、熔胶、性粘合剂、织上浆剂、物涂层等。
17.
Study on the Synthesis and Application of Polyurethane Acrylate Prepolymer
聚氨酯丙烯酸酯预聚体的合成及应用
18.
Synthesis of Polyester Hot-Melt Adhesive for Aluminium Foils Packaging for Medicine
药品包装铝箱用聚酯热熔粘合剂的合成