1.
Microstructure and Properties of 12MnNb Steel Processed by Equal Channel Angular Processing;
12MnNb钢的ECAP变形及组织性能研究
2.
Finite Element Simulation of CP-Ti during Equal Channel Angular Processing at Room Temperature;
工业纯钛室温ECAP变形有限元模拟研究
3.
Study on Microstructure and Properties of Al-Mg-Mn Alloy Processed by Equal Channel Angular Pressing;
Al-Mg-Mn合金ECAP变形组织与性能的研究
4.
Equal Channel Angular Pressing of 20MnSi Steel and Its Microstructure and Mechanical Properties;
20MnSi钢ECAP变形及组织性能研究
5.
Development of Deformation Structures in Medium Carbon Steel (0.45 wt.% C) by Equal Channel Angular Processing;
45钢ECAP变形及组织细化研究
6.
An Investigation of Grain Refinement Mechanism of Low-carbon Steel by Equal Channel Angular Processing;
低碳钢的ECAP变形及组织细化机制研究
7.
Study on Microstructure of Commercial Pure Titanium Processed by ECAP at Room Temperature
室温ECAP变形工业纯钛的微观组织研究
8.
Microstructure and Properties of Commercial Pure Titanium Processed by ECAP at Room Temperature
工业纯钛室温ECAP变形的组织和性能
9.
Study of Magnetic Properties of 2J4 Alloy Deformed by Equal Channel Angular Pressing after Tempering
ECAP变形2J4合金回火后的磁性能研究
10.
Finite Element Simulation of Deformation Behavior of Preform Designed Workpiece During Equal Channel Angular Pressing
楔形头部试样的ECAP变形行为有限元模拟
11.
The Effect of ECAP Deformation on Mechanical Property and Damping Capacity of AZ31 Magnesium Alloy;
ECAP变形对AZ31镁合金力学性能与阻尼性能的影响
12.
Deformation Behaviors of Spray Deposited Ultrahigh Strength Al Alloy by ECAP;
喷射沉积超高强铝合金ECAP变形行为研究
13.
Microstructure and Properties of CP-Ti Processed by ECAP at Room Temperature;
工业纯钛室温ECAP变形工艺及组织性能研究
14.
Electrochemical Corrosion Behavior of Super-hard Aluminum Alloy Deformed by ECAP
ECAP变形后超硬铝合金的电化学腐蚀行为
15.
STRAIN-INDUCED MARTENSITIC TRANSFORMATION IN 304L AUSTENITIC STAINLESS STEEL UNDER ECAP DEFORMATION
ECAP变形下304L奥氏体不锈钢的形变诱导马氏体相变
16.
Effect of ECAP on Microstructure and Mechanical Properties of Solid-State Recycled AZ91 Chips
ECAP变形对AZ91镁屑固相成形材料显微组织与力学性能的影响
17.
Research on Microstructure and Property of TiB_2/Cu and Brass Fabricated by Equal Channel Angular Pressing
TiB_2/Cu复合材料和黄铜ECAP变形后的组织及性能研究
18.
Microstructure and Properties of CP-Ti Processed by ECAP and Cold Rolling at Room Temperature;
工业纯钛室温ECAP与冷轧变形及组织性能研究