说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 抗渗碳
1.
Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;
扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究
2.
The basic concepts for improving anti-carbonation performance of ethylene cracking furnace lubes by surface modification are proposed based upon the carbonation process of the furnace tubes of elhylene cracker.
针对乙烯裂解炉管的渗碳过程,指出了采用表面改性技术提高乙烯裂解炉管抗渗碳性能的基本思路。
3.
liquid carbonitriding
液体碳氮共渗, 液体渗碳氮化法
4.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
5.
continuous bright carburizing quenching furnace
连续式光辉渗碳淬火炉
6.
case hardening grade alloy gear steel
渗碳(皮硬)级合金齿轮钢
7.
Gas Nitrocarburzing for 4Cr5MoSiV1 Steel
4Cr5MoSiV1(H13)钢的气体氮碳共渗
8.
Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;
合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究
9.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
10.
INVESTIGATION OF THE ACCURATE CONTROL ABOUTSURFACE CARBON CONCENTRATION OF CARBURISING PART
渗碳零件表面碳浓度精确控制的探讨
11.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似,渗碳层厚度越大,特别是对于渗碳层厚度不一的渗碳用钢,淬火时更易产生翘曲。
12.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
13.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
14.
Research Hydrogen-free Carbonizing and Hydrogen-free Carbonitriding on Titanium and Titanium Alloy Ti6A14V by Double Glow Plasma Discharge;
钛及钛合金Ti6A14V双层辉光离子无氢渗碳及无氢碳氮共渗的研究
15.
Research of Middle Temperature Chromizing on Carbon Steel with Double Glow Plasma Surface Alloying Process and Carbon Migration in the Chromized Layer;
碳钢表面中温双辉等离子渗铬合金化及渗层中碳迁移的研究
16.
Study on Optimizing the Tecnics of the Super Saturation Carburization on 20Cr Steel and a New Stype Super Saturation Carberization Steel;
20Cr钢超饱和渗碳工艺优化及一种新型超饱和渗碳钢的研究
17.
Effect of Nickel Infiltration on Chemical Vapor Infiltration Process and Properties of C/SiC;
渗镍对碳/碳化硅化学气相渗透过程与性能的影响
18.
Effect of Infiltration Metal on Structure and Properties of C/C Composite Materials;
金属浸渗对碳/碳复合材料组织、性能的影响