1.
Distribution of Bubbles in Water Model of Slab Continuous Casting Mold with Argon Blowing
水口吹氩板坯连铸结晶器水模内气泡的分布特征
2.
The experiments suggest that both bottom and bottom side argon blowing techniques provide better metallurgical effects than top blowing process, obtaining steel quality satisfactory to continuous casting requirements.
结果表明，底侧吹氩和底吹氩工艺的冶金效果均优于顶吹氩工艺，钢水质量均能满足连铸要求。
3.
Argon-blown pocket block and pocket block should be selected rationally in light of the metallurgical technology and service life of steel ladle.
吹氩座砖和水口座砖应根据冶炼工艺情况及钢包使用寿命的不同进行合理选择。
4.
Prediction model of end point temperature of molten steel in argon blowing station and its simulation application
吹氩站钢水终点温度预报模型及其仿真应用
5.
A Study on Water Modeling of Ladle with Bottom Argon Blowing in Critical Slag Entrapment Condition
钢包底吹氩卷渣临界条件的水模型研究
6.
A Study of Water Model for Effect of Ladle Bottom Argon Blowing Position on Inclusion Removal from Liquid Steel
钢包底吹氩位置对钢水去夹杂影响的水模型研究
7.
Study on Simulation of Level Fluctuation in Wide and Thick Slab Continuous Casting Mould with Argon Blowing
吹氩宽厚板坯连铸结晶器内液面波动行为的水模型研究
8.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
9.
Argon-blown pocket block is a supportive new and hi-tech product developed simultaneously with bottom-blow argon vent brick.
二、吹氩座砖是与底吹氩透气砖同步开发的配套高新技术产品。
10.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
11.
plication of PLC Control System at the Argon Stand;
PLC控制系统在二钢吹氩站的应用
12.
The mouthpiece of a wind instrument.
吹口管乐器的吹口处
13.
mouth-operated blowpipe of base metals
口吹式吹管，贱金属制
14.
All full-penetration joints shall be back purged with argon or helium.
所有全熔透焊接接头用氩或氦进行反吹。
15.
Mathematical model of molten steel circulation in ladle with Ar blast
钢包吹氩时钢液循环流动过程数学模型研究
16.
A STUDY ON ARGON-OXYGEN COMBINATION BLOWING PROCESS FOR LOW-CARBON CAST STAINLESS STEEL
氩-氧复合吹炼法生产低碳不锈铸钢的试验研究
17.
Mathematical and Hydromechanical Simulation on Fluid Flow in Argon Blowing Process in Ladle Furnace;
LF吹氩过程中钢液流动的数学物理模拟
18.
The Process Mechanism Analysis and Control Method Research of Steel-Making Bottom Blowing Argon
炼钢底吹氩过程机理分析与控制方法研究