1.
Multi-rigid-body Dynamic Simulation of the Bending Roller Unit of Direct-driving Stretcher Leveller
直接传动型拉伸弯曲矫直机弯曲辊系多刚体动力学仿真研究
2.
The strip deformation of simulation model established in tension levelling
带材拉伸弯曲矫直变形仿真模型的建立
3.
Application of Profibus Technology in Tension-Bending Straightening Machine
Profibus控制技术在拉伸弯曲矫直机组中的应用
4.
The Research on Strip of Tension Leveling Theory and Simulation Based on Improved the Shape;
基于改善板形的带材拉伸弯曲矫直理论研究及其仿真
5.
Study on Aided-Design of the Tension Leveling of Metal Strip and Its Control Simulation;
拉伸弯曲矫直机辅助设计与控制仿真系统的研究与开发
6.
Study on Process Parameter for the Tension Leveling of Metal Strip with the Finite Element Method;
基于有限元方法的金属带材连续拉伸弯曲矫直工艺参数研究
7.
"The leveller consists of straightener, tension rolls and driving device, basement and speedy roll change device. "
拉伸弯曲矫直机由矫直机、张力辊及其传动装置、底座和快速换辊装置部分组成。
8.
The Tension leveller is used to improve strip shape and mechanical properties.
本机组采用拉伸弯曲矫直机的主要用途是改善镀锌带材板形及机械性能。
9.
act of stretching or straightening out a flexed limb.
拉伸或矫正一个弯曲的肢体。
10.
The Accident Analysis and Transformation Study on the Stretcher Straightener;
拉伸弯曲矫正机设备故障分析及改造研究
11.
To release(a bow, for example)from flexure or tension.
伸直放开弯曲或拉紧的（如，弓）
12.
Further discussion of bending and strengthening curve in CCM
连铸机中弯曲矫直曲线的进一步探讨
13.
Research and Application of Strand's New-ideal Continuous Straightening Curve
新型连续弯曲矫直曲线的研究与应用
14.
Effect of Entrance/exit Leveler Roller' intermesh to Plate Flatness
辊式矫直过程中板带弯曲挠度的确定
15.
Research on Bearing Capacity of 6000T Stretcher Leveler;
6000吨拉伸矫直机承载能力研究
16.
Research of Select Type and Design for Strip Continuous Tensile Straightening Units
带钢连续拉伸矫直机选型与设计研究
17.
With some angle between axes of pass and rolls, the flexture either on plane or on sides can straightened at one time.
孔型轴线与矫直辊轴线成一定的倾角，使得扁钢的平面弯曲及侧面弯曲一次性被矫直。
18.
Failure Analysis and Repair of the Bending Rollers of Flattener Part for Caster
连铸机矫直段辊子弯曲失效分析及其返修处理