1.
The Appliance Research in the Shapping-performance of 5A90 Al-Li Alloy Sheet
5A90铝锂合金薄板成形工艺研究
2.
Effect of Annealing of Hot-Rolled Band on the Formability of 00Cr17Ti Cold-Rolled and Annealed Sheet
热带退火对00Cr17Ti薄板成形性能的影响
3.
Modeling, Analysis and Experimental Study of Micro/Meso Scale Sheet Forming;
微/介观尺度下薄板成形建模分析与实验研究
4.
The Research on the Drawing of FVS0812 Hemisphere-shaped Workpiece;
FVS0812薄板半球形零件拉深成形研究
5.
metal formed into a thin plate.
形成一个金属薄板的金属。
6.
The Study of Finite Element Analysis on Multi-Point Forming Process of Sheet Metal;
薄板多点成形过程有限元分析的研究
7.
Research on Gas Bulging Forming and Simulation of AZ31B Magnesium Alloy Sheet
AZ31B镁合金薄板气胀成形及数值模拟
8.
Superplastic Gas Bulging Forming of AZ31B Magnesium Alloy Thin Sheet
AZ31B镁合金薄板超塑性气胀成形
9.
Analysis and Solving on Cold Teeth Formed at Start Casting of Thin Slab Caster
薄板铸机开浇冷齿形成的分析与解决
10.
Numerical Simulation and Shaping Analysis on the Process of Multi-Point Forming for Thin Sheet Metal;
薄板多点成形过程的数值模拟及成形性分析
11.
Numerical Simulation and Forming Performance Comparison on the Process of Multi-Point Forming and Die Forming for Sheet Metal;
薄板多点成形与模具成形过程数值模拟及成形性比较
12.
Control on blank holder pressure (BHP) during viscous pressure forming (VPF) thin-walled sheet metal parts
薄板件粘性介质压力成形过程的压边力控制
13.
Research on Formability and Damage Mechanism of Deep-drawing Sheet Metal;
汽车深冲薄钢板冲压成形及损伤机理研究
14.
The Study of Flanging Blank Based on Finite Element Simulation;
基于数值模拟的薄板翻边成形坯料研究
15.
The Anisotropy of Metal Sheet and Influence on the Sheet Foming;
金属薄板的各向异性及其对成形过程的影响
16.
The Failure Analyses and Countermeasure Study for Deep-draw Thermal Forming of TC1 Ti Alloy Thin Plate;
TC1钛合金薄板深拉热成形失效分析与对策研究
17.
The Physical Simulation of the Deforming Frame with High Rib and Thin Web;
高筋薄腹板结构件成形规律的物理模拟
18.
Numerical Simulation for Micro Laser Peen Forming of Ultrathin Sheet Metal;
超薄板材脉冲激光微冲击成形过程数值模拟