1.
Practice on Technology Process for Replacing Side Carbon Block for Aluminium Smelting Pot of GL190kA Series without Stoppage
GL190kA铝电解槽系列不停槽更换侧部炭块工艺的实践
2.
Application of shut-off and restart-up technology when 306kA aluminium reduction cell with power
306kA铝电解槽不停电停、开槽技术的应用实践
3.
Time is adjustable, every trough stays for 1.5 minutes when maximum speed.
时间可调，最快时每槽停留1.5分钟。
4.
This small gutter was in front of our parking place, looked so cute.
我们停车场所前的一个小水槽，看上去蛮可爱的。
5.
Numerical simulation of the residence time distribution in a continuous stirred tank with a pseudoplastic fluid
连续搅拌槽内假塑性流体停留时间分布的数值模拟
6.
starting sheet cells
始极槽,种板槽,始板槽
7.
Ductor roller: On an printing press,the roller which alternately contacts the duct roller and distributing roller.Length of contact or "dwell" of ductor can be adjusted.ALso called Feed roller.
输送轴:印刷机上，分别接触墨槽和分布轴的一支轴。接触时间或停顿时间是可以调校的。
8.
groove-cutting chisel
槽刨, 油槽铲(轴承)
9.
The groove so cut.
榫槽这种切割的凹槽
10.
A long, narrow furrow or channel.
沟，槽一长而窄的沟或槽
11.
CAB CAVITY 42, AND GROUND, CAB CAVITY
ＣＡＢ插槽４２和地、ＣＡＢ插槽５。
12.
Grooved pins--Parallel grooved
GB/T13829.1-1992槽销平行沟槽
13.
Such a trough is called flume.
这样的木槽叫水槽。
14.
A gutter under the eaves of a roof.
水槽屋檐下的凹槽：
15.
automatic chute
自动装料槽, 自动输矿槽
16.
drunken saw
【机】切[开]槽锯
17.
A furrow or groove, as in a column.
沟槽如柱子上的槽或沟槽
18.
Water fountain: The metal trough on an offset press which holds the damping solution.
水槽:在柯式印刷机上，盛载水槽液的槽。