1.
Design and Experiment Research of Hot Extrusion Simulating Mould;
热挤压模拟实验装置的设计与实验研究
2.
Optimized Die Design and Numerical Simulation for Hot Extrusion Process of the Valve;
气门热挤压成形过程模拟及其模具优化设计
3.
Finite Element Simulation of Hot Extrusion for TA2 Tubing by Flat-cone Die
TA2管材平锥模热挤压成形过程的有限元模拟
4.
Numerical simulation of CPU heat sink extrusion process and die optimum design
CPU散热片挤压过程的数值模拟及模具优化
5.
Thermal-Mechanical Coupling Numerical Simulation of Reciprocating Extrusion Processes on AZ31 Mg Alloy;
AZ31镁合金往复挤压成形热力耦合模拟研究
6.
Thermo-Mechanical Coupled Simulation for 6063 Aluminium Alloy Tube Extrusion;
6063铝管挤压成形过程的热力耦合数值模拟
7.
Finite Element Numerical Simulation of Hot Indirect Extrusion Process of 6061 Aluminum Alloys
6061铝合金反向热挤压工艺参数优化及其模拟
8.
THERMOMECHANICAL MODELING OF SOLIDIFICATION PROCESS OF SQUEEZE CASTING Ⅱ.Numerical Simulation and Experimental Validation
挤压铸造凝固过程热-力耦合模拟 Ⅱ.模拟计算及实验验证
9.
Die Structure and Process Parameters Optimization of Hot Extrusion for Austenitic Stainless Steel Pipes Based on Numerical Simulation
基于数值模拟的奥氏体不锈钢管材热挤压模具和工艺优化
10.
THERMOMECHANICAL MODELING OF SOLIDIFICATION PROCESS OF SQUEEZE CASTING Ⅰ.Mathematic Model and Solution Methodology
挤压铸造凝固过程热-力耦合模拟 Ⅰ.数学模型及求解方法
11.
Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process
冷挤压组合凹模失效分析及挤压过程数值模拟
12.
The Numerical Simulation and Verification of Hot Extruded Ultra-High Strength Aluminum Alloys Produced by Spray Forming
喷射沉积超高强铝合金热挤压数值模拟及工艺验证
13.
Finite element simulation and analysis of 12 vol%SiC_P/2024Al matrix composites for hot extrusion process
12vol%SiC_P/2024Al基复合材料热挤压过程有限元模拟与分析
14.
Finite element simulation research of vibrationbushings forging based on the thermal-mechanical coupling
基于热力耦合的减振轴套挤压成形有限元模拟研究
15.
Numerical Simulation of Aluminum Profile Extrusion Process and Die Design
铝型材挤压过程数值模拟及模具设计
16.
CFRP Pultrusion Process Numerical Simulation and Analysis of Thermal Strain;
CFRP拉挤工艺过程模拟与热应变分析
17.
Finite Element Simulation and Application of Equal Channel Angular Extrusion;
等通道转角挤压的有限元模拟及应用
18.
The Numerical Simulation for Continuous Extrusion Cladding (CONCLAD) Process;
连续挤压包覆（CONCLAD）过程的数值模拟