1.
The Research on Friction Stir Welding Process of Magnesium Alloy and Corrosion Protection of the Weld
镁合金搅拌摩擦焊工艺及焊缝腐蚀防护研究
2.
Develop green corrsion inhibition to prevent under-deposit and weld corrosion
发展绿色缓蚀剂防止地下沉积和焊缝腐蚀
3.
Research of stress corrosion properties on 2519 aluminum alloy plate and its welding joint
2519铝合金及焊缝应力腐蚀性能研究
4.
Electrochemical Corrosion Behavior of Friction Stir Welding Dissimilar Weld of 5083 and 6082 Aluminum Alloy
铝合金5083-6082搅拌摩擦焊焊缝的电化学腐蚀行为
5.
Failure Reason for the Nickel-based Alloy Weld Intergranular Corrosion Test
镍基合金焊缝晶间腐蚀试验不合格原因浅析
6.
Experiment and Analysis for Welded Joint Anti-Intercrystalline Corrosion of 0cr18ni9 Steel
提高0Cr18Ni9钢焊缝抗晶间腐蚀性的试验及分析
7.
Microstructure and Corrosion Resistance of Friction Stir Welded Aluminum Alloy Treated by Microarc Oxidation
铝合金搅拌摩擦焊缝微弧氧化后的组织结构与腐蚀性能
8.
Surface Nano-composite Electroplating of 16MnR Steel Weldment and Anti-wet H_2S Stress Corrosion Study
16MnR钢焊缝表面纳米复合电镀及抗湿H_2S应力腐蚀试验研究
9.
crevice corrosion test for stainless steel
不锈钢缝隙腐蚀试验
10.
It was found that the pitting and crevice corrosion of steel wires were the main forms of corrosion.
发现70钢丝的缝隙腐蚀和点蚀是钢丝绳的主要腐蚀形式。
11.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
12.
Study on the Corrosion Behaviors of Friction Stir Welded Joints of Al Alloys;
铝合金搅拌摩擦焊接头腐蚀行为研究
13.
Study on TIG Welding Process and Welded Joint Corrosion of AZ31B Magnesium Alloy
AZ31B镁合金TIG焊及接头腐蚀性研究
14.
Research of A-TIG Welding of Stainless Steel and the Stress Corrosion-Resistance
不锈钢A-TIG焊接与抗腐蚀性能研究
15.
Investigation on Corrosion Behavior of 20MnMo/13MnMoNi54 Dissimilar Welded Joints
20MnMo与13MnMoNi54焊接接头耐腐蚀性能研究
16.
Research on the corrosion-resistant performance of the X65 pipeline steel welded sub
X65管线钢焊接接头耐腐蚀性能研究
17.
Corrosion resistance of intermediate temperature filler metal for stepped welding to 6063 aluminum alloy
6063铝合金阶梯焊中温钎料腐蚀性能
18.
Influence of Post Heat Treatment after Welding on Corrosive Resistance of the 20g Steel
焊接后热处理对20g抗腐蚀性能的影响