1.
Analytical Solutions for the Anti-plane Problems with an Arc crack
圆弧裂纹的反平面剪切问题的解析解
2.
Anti-plane Strain Problems of Circular arc Cracks Between Bonded Dissimilar Piezoelectric Materials
不同压电材料反平面应变状态的共圆弧界面裂纹问题
3.
ANTIPLANE STRAIN PROBLEMS OF CIRCULAR ARC CRACKS BETWEEN BONDED DISSIMILAR PIEZOELECTRIC MATERIALS UNDER CONCENTRATED FORCES
集中载荷作用下的不同压电材料反平面应变状态的共圆弧界面裂纹问题
4.
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
5.
Calculations for Semi-Circular Arc Type Corrugated Tube-Applications of the Theory of Slender Ring Shells
半圆弧波纹管的计算──细环壳理论的应用
6.
Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack
含表面裂纹圆柱壳体的热力耦合效应
7.
Analysis on Reasons of Surface Cracks Formation of S355 Round Tube Blank and Corresponding Countermeasures Taken
S355圆管坯表面裂纹成因及解决对策
8.
Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface
圆筒表面椭圆裂纹应力强度因子的数值研究
9.
FRACTURE TOUGHNESS MEASUREMENT OF CAST MAGNESIUM ALLOY BY CYLINDRICAL SPECIMEN WITH RING-SHAPED CRACK
用环状裂纹圆柱试样测定铸镁合金的断裂韧度
10.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
11.
ARC INTERFACE CRACK IN A THREE-PHASE PIEZOELECTRIC COMPOSITE CONSTITUTIVE MODEL
三相压电复合本构模型中的弧形界面裂纹
12.
External defects: undercut,overip,arc pit, gas cavity in surface,crack in surface.
外部缺陷：咬边、焊瘤、弧坑、表面气孔、表面裂纹。
13.
Cause Analysis and Prevention Measure of Terminal Crack of Submerge-arc Welding Longtitudinal Weld
埋弧焊纵焊缝终端裂纹原因分析及预防措施
14.
Production and Prevention of Solidification Crack in Large-heat-input Submerged-arc Welding
大线能量埋弧焊凝固裂纹的产生及预防
15.
Crack- A mark found on a wafer that is greater than0.25 mm in length.
裂纹-长度大于0.25毫米的晶圆片表面微痕。
16.
THE STRESS INTENSITY FACTOR OF A PENNY SHAPE CRACK EMBEDDED IN THE FIBER OF THE COMPOSITE MATERIAL
复合材料纤维内含圆盘状裂纹的应力强度因子
17.
Scattering of SH-Wave by a Semi-Cylindrical Hill Above a Subsurface Inclusion and Crack;
SH波对夹杂裂纹附近半圆形凸起的散射
18.
Effects of Piezoelectric Particle on the Three-dimension Crack-tip Stress Fields of Near Crack;
压电圆柱形夹杂对邻近裂纹三维应力场的影响