1.
The top of retainer must drop just below threads in the valve body.
护圈上方必须放置在阀门阀体螺纹以下。
2.
Design of Pneumatic Gauge Head for Valve Body's Taper of Wedged Odd Gate Valve
楔式单闸板阀门阀体锥度气动测头的设计
3.
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
4.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。
5.
3 The valve body and disc of valve shall be made of ductile cast iron.
阀门的阀体、阀板制造材料应该是球墨铸铁。
6.
The end flaps of the elastomeric seat should be flexed downward toward the valve I.D. as the body halves are being separated.
当阀体分开时，弹性阀体阀座的边缘应该朝向阀门内径弯曲。
7.
SUN HYDRAULIK GMBH offers Offers to Screw-in valves, Globe valves and Valve housing.
提供轴承箱、轴承体、阀体、阀箱、阀套、阀门外壳及其它产品。
8.
"Primary uses for wrot brass are for ball valve stems and balls, and iron valve stems. a forging grade of brass is used in ball valve bodies and pieces."
黄铜的主要用途是球阀阀杆和球体,和铸铁阀门的阀杆。可锻黄铜可用于球阀阀体和断口部件。
9.
Install valve in the direction of the flow arrows on the valve body.
按照阀体上的箭头方向安装阀门。
10.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
11.
Tag location for gate and globe valves is typically on the valve yoke or body/ bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/盖法兰上。
12.
MATERIAL AND SERVICE– Cast steel bolted bonnet valves are available in a variety of body/ bonnet materials and trims.
材料和应用–铸钢螺栓阀盖阀门可配置多种阀体/盖材料和阀内件。
13.
Pacific cast steel bolted bonnet valves are supplied in a wide range of body/ bonnet materials and trims.
美国太平洋铸钢螺栓阀盖阀门可以配置多种阀体/盖材料和阀内件。
14.
ball check valve
球形止回阀（附有球阀和阀座的阀门,液体只能单方向通过）
15.
Ensure that valve is installed in proper flow direction. Refer to flow direction arrow on valve nameplate or body.
确保阀门按照正确的流向安装。参照阀门铭牌或阀体上的流向箭头。
16.
Before installation, check line of flow through valve so that valve will function properly.
安装前，切断通过阀门的流体，以使阀门工作正常。
17.
"Most common uses in valves are: stem, body and ball materials."
这种材料在阀门上主要用做:阀杆,阀体和球体材料。
18.
General purpose industrial valves-Diaphragm valves
GB/T12239-1989通用阀门隔膜阀