1.
Spheroidizing Process for Cementite of Steel T12 and Its Microscopic Structure
T12钢渗碳体球化处理及其显微组织
2.
liquid carbonitriding
液体碳氮共渗, 液体渗碳氮化法
3.
MICROSTRUCTURE EVOLUTION OF HYPEREUTECTOID STEELS DURING WARM DEFORMATION Ⅱ.Cementite Spheroidization and Effects of Al
过共析钢温变形过程中的组织演变 Ⅱ.渗碳体的球化及Al的影响
4.
Study on Austenitizing Behaviors of Cementite in GCr15 Bearing Steel
GCr15轴承钢中渗碳体的奥氏体化行为研究
5.
Refinement mechanicm of cementite phase in the process of surface nanocrystallization of 38CrSi steel
38CrSi合金钢表面纳米化中渗碳体相的细化分析
6.
Carburization of Sponge Ferromanganese for Manganese Oxide Fines Containing Coal by Microwave Heating
微波加热含碳氧化锰矿粉体还原过程中锰铁金属化物的渗碳行为
7.
Study on the Autogenously Grinding Hammer of Rubbing Machine by Solid Carburizing
揉碎机锤片自磨刃强化固体渗碳工艺的研究
8.
Brightening Treatment of Austenite Stainless Steel after Plasma Carburizing
奥氏体不锈钢低温离子渗碳后的亮化处理
9.
Gas Nitrocarburzing for 4Cr5MoSiV1 Steel
4Cr5MoSiV1(H13)钢的气体氮碳共渗
10.
Microstructure Characteristic of Carbon Nanospheres by CaC_2-CHCl_3 System
碳化钙-氯仿体系制备纳米碳球及其结构表征
11.
The Influence of Medium and Low Carbon Surface Nanocrystallization to Low Temperature Gas Nitriding;
中低碳钢表面纳米化对低温气体渗氮行为的影响
12.
Study on Brightening Treatment of Austenitic Stainless Steel after Low Temperature Plasma Carburizing
低温离子渗碳奥氏体不锈钢表面亮化处理的研究
13.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
14.
STUDY ON GRINDING HAMMER REINFORCEMENT BY SOLID CARBURIZING
固体渗碳工艺条件下的粉碎机锤片的强化试验研究
15.
Effect of Silicon Carbide Powder on Preparation of C_f/SiC Composites by Molten Silicon Infiltration
碳化硅粉体对熔融渗硅法制备C_f/SiC复合材料结构的影响
16.
Effect of Nickel Infiltration on Chemical Vapor Infiltration Process and Properties of C/SiC;
渗镍对碳/碳化硅化学气相渗透过程与性能的影响
17.
PREPARATION AND ELECTROCHEMICAL PROPERTIES OF CARBON NANOSPHERES FROM CaC_2-CCl_4 SYSTEM
CaC_2-CCl_4体系反应制备纳米碳球及其电化学性能
18.
Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;
扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究