1.
Research on the Injection Molding Process of 316L Stainless Steel Powder and Titanium Powder
316L不锈钢粉末和Ti粉末的注射成型工艺研究
2.
On Warm Compaction Technology of 316L Stainless Steel Powder;
316L不锈钢粉末温压技术的研究
3.
Analysis of the morphology of 316L stainless part formed by selective laser melting
选区激光熔化316L不锈钢粉末形貌分析
4.
PILOT PLANT TEST OF REMOVING CATALYST FINES FROM FCC SLURRY WITH SINTERED STAINLESS STEEL FILTER CORE
不锈钢粉末烧结滤芯脱除FCC油浆中催化剂粉末中试研究
5.
Effects of Sintering Atmosphere on Sintered Properties of Stainless Steel Powders;
烧结气氛对不锈钢粉末烧结性能的影响
6.
Pore and Permeation of Composite of Stainless Steel Powders and Silkscreen
不锈钢粉末与丝网复合的孔隙和透过性能
7.
Characterization of 316 L stainless steel powders produced by supersonic gas atomization
超音速气雾化制备316L不锈钢粉末的表征
8.
The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
9.
Study on the Process of Fabricating Fine Stainless Steel Powder by Gas and Solid Dual-phase Atomization;
固气两相流雾化制备微细不锈钢粉末工艺的研究
10.
Study on the Technique During Selective Laser Melting of Stainless Steel Powder
不锈钢粉末的选择性激光熔化快速成形工艺研究
11.
Research and Application Prospects of Ultrafine Stainless Steel Powder Prepared by High Energy Milling Method
高能球磨法制备超细不锈钢粉末的研究及应用前景
12.
Research on non-aqueous gelcasting process with high-nitrogn low-nickel stainless steel powder
非水基凝胶注模成形高氮无镍不锈钢粉末的研究
13.
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
14.
OPPORTUNITIES AND CHALLENGES OF PM STAINLESS STEEL AUTOMOTIVE PARTS
粉末冶金不锈钢汽车零件的机遇与挑战
15.
Study on Powder Injection Molding for 316L Stainless Steel and ZTA Ceramics;
316L不锈钢及ZTA陶瓷粉末注射成形技术的研究
16.
Influence of Sintering Parameters on Performance of Powder Metallurgy Cr13 Stainless Steel
烧结参数对粉末冶金Cr13型不锈钢性能的影响
17.
Study on the Reaction Joint and the Structure Property of Laser-indueced Ni-Al Powder Materials and Stainless Steel;
激光诱导Ni-Al粉末材料与不锈钢的反应连接及组织与性能研究
18.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型