1.
The Mohr-Coulomb model is based on plotting Mohr's circle for states of stress at failure in the plane of the maximum and minimum principal stresses.
莫尔－库仑模式基于莫尔圆来判断最大和最小主应力平面上的破坏应力状态。
2.
Shortcut of Determining the Direction of the Largest Main Stress under the Status of Plane Stress;
平面应力状态下判定最大主应力方向的捷径
3.
Intuitive Judgment of Maximum Principal Stress′s Direction of Plane Stree Statements;
平面应力状态最大主应力方向的直观判定
4.
Thus the directions that emerge for extremizing the normal stress are the directions corresponding to the principal stresses.
因此，产生最大正应力的方向就是相应于主应力的方向。
5.
Either the maximum and minimum stresses of one of these and the mean stress-are required to specify the fluctuation.
需要两个值：最大应力和最小应力或二者之一和平均应力，以确定其起伏程度。
6.
The Application of Improved MMC Method in News Topics' Sources Tracing
改进的最小最大聚类方法在新闻主题来源追踪中的应用
7.
The "catch" phase of the stroke should utilize an out-and-downward scull with minimal force.
划臂的“抓水”阶段应该利用最小的力外下划。
8.
A minimum tension is exerted on the fabric during transportation in the chainless dwelling zone.
在此直辊反应区织物能以最小的张力运行。
9.
Application of Robust Least Squares in Power System State Estimation;
抗差最小二乘法在电力系统状态估计中的应用
10.
Research on a Passive Lossless Snubber with Minimum Voltage Stress;
一种最小电压应力的无源无损软开关技术研究
11.
Least energy dissipation principle and its application in plastic mechanics
最小耗能原理及其在塑性力学中的应用
12.
Determination of Residual Stresses in Aluminum Alloy Plate 7075 Based on Minimizing Stress Uncertainty
基于应力不确定性最小化法的7075铝合金板内部残余应力检测
13.
Within this range, the peak overpressure appears to be the main criterion of damage.
在此范围内，最高超压力的大小是判断破坏程序的主要依据。
14.
Reliability Evaluation of Main Electrical Connection of Shipboard based on Disjointing Minimal Pathset
基于直接不交化最小路的船舶电力主接线可靠性分析
15.
Application of principal component regression and partial least square in blast furnace iron-making.
主成分回归和偏最小二乘法在高炉冶炼中的应用
16.
minimum burner pressure valve
燃烧室最小压力活门
17.
principle of minimum potential energy in theory of elastic- ity
弹性力学最小势能原理
18.
The maximum stress of the framework occurred at the node of undersurface of the main hydraulic cylinder mounting boss.
机架最大应力值发生在主油缸安装凸台下表面的节点上。