1.
Study on the High-temperature Creep Behavior and the Estimation of Creep Crack Parameter C～* of Cracks in Bi-material CT Specimen;
双材料CT试样裂纹高温蠕变行为的研究与蠕变断裂参量C～*的估算
2.
testing methods for creep rupture of adhesive bonds
粘合剂蠕变断裂的试验方法
3.
Creep Rupture Behavior of a Cast Ni-base Superalloy at High Temperature
一种铸造镍基高温合金的高温蠕变断裂行为
4.
Microstructure and Creep Fracture Features of FGH95 Nickel-base Superalloy
FGH95粉末镍基合金的组织结构与蠕变断裂特征
5.
SCG Test on the Welding Joints of PE Gas Pipeline and Study on the Creep Fracture Parameters
聚乙烯燃气管道焊缝的SCG试验与蠕变断裂参量研究
6.
Prediction of Creep Rupture Life of Single Crystal Ni-Based Superalloy by Abductive Network
基于Abductive网络的镍基单晶高温合金蠕变断裂寿命预测
7.
The Research on Safe Reliability Evaluation of 12%Cr-steel High-temprature Bolt Based on Accelerated Creep Rupture Test
基于加速蠕变断裂试验的12%Cr钢高温螺栓安全可靠性评价研究
8.
Creep rupture and enhancement mechanism of Ag particle-enhancement composite solder joints
Ag颗粒增强复合钎料钎焊接头蠕变断裂及强化机理研究
9.
The creep rupture properties of a low Re content second-generation directionally solidified superalloy DZ59
低Re含量第二代柱晶高温合金DZ59的蠕变断裂性能
10.
Electromigration Induced Brittle Creep Fracture Behavior of Lead-Free Solder Micro-Interconnections
电迁移致无铅钎料微互连焊点的脆性蠕变断裂行为
11.
SOME CRITICAL ISSUES IN CREEP AND FRACTURE ASSESSMENT AT HIGH TEMPERATURE
高温蠕变与断裂评价的若干关键问题
12.
Steady Creep Rate and Rupture Life for 2.25Cr-1Mo Steel
2.25Cr-1Mo钢稳态蠕变速率和断裂寿命的研究
13.
Fracture Mechanism of Plastic-wood Floors under Fatigue and Creep Interaction
疲劳/蠕变交互作用下塑木地板的断裂机理
14.
The different kinds of material deformation (elasticity, plasticity, fracture, creep, fatigue) are explained in detail.
不同种材料的变形（弹性，塑性，断裂，蠕变，疲劳），详细解释了。
15.
Facture damage behavior of wood-bamboo composites board under the mutual action of fatigue and creep was studied.
研究了在疲劳／蠕变交互作用下竹木复合层合板的断裂损伤行为。
16.
Microscopic Marks of Stick Slip and Creep Slippage in Deformation Products along the Daqingshan Piedmont Active Fault
大青山山前活动断裂变形产物中的微观粘滑与蠕滑标志
17.
Numerical Simulation Analysis of the Creep Crack Characteristics of 2.25Cr1Mo Steel
2.25Cr1Mo钢蠕变裂纹特性数值模拟分析
18.
Analysis of Strength Factor for Non steady Creeping Crack Tip Field
非稳态蠕变二维裂纹尖端场强近似分析