1.
Erosion Properties and Mechanisms of B_4C/TiB_2/Al_2O_3 Series Nozzles
B_4C/TiB_2/Al_2O_3喷嘴冲蚀性能及其冲蚀机理
2.
Erosion Properties and Mechanisms of B_4C/TiB_2/Mo Series Nozzles
B_4C/TiB_2/Mo喷嘴冲蚀性能及其冲蚀机理
3.
Development of New B_4C Composite Ceramic Nozzle and Study on Its Erosion Mechanisms;
新型B_4C基复合陶瓷喷嘴研究开发及其冲蚀机理研究
4.
Study on Erosion Mechanisms and Polishing Technology of Hard-Brittle Materials Machined with Precision Abrasive Waterjet;
精密磨料水射流加工硬脆材料冲蚀机理及抛光技术研究
5.
Anti-Erosion Theory on Elastic Coating of Hydraulic Turbine and Its Application;
水机涡轮弹性涂层抗冲蚀理论及应用
6.
An Elementary Study for the Mechanism of Earth Dam Break
土石坝溃决冲刷侵蚀的力学机理初探
7.
The Influence of Impact Energy and Impact Angle on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
冲击功、冲击角对湿磨衬板钢冲击腐蚀磨损机理影响
8.
Effect of Lanthanum on Impact Wear Behavior and Mechanism of Liner-board Steels in Corrosive Slurry
镧对衬板钢在腐蚀料浆环境下的冲击腐蚀性能与机理的影响
9.
Research of the Mechanism of Material Erosion Based on Single Pulse in EDM;
基于单脉冲电火花加工的材料蚀除机理研究
10.
Research on Erosion Wear Mechanisms of Ceramic Sandblasting Nozzles Using FEA Methods;
基于有限元法的陶瓷喷砂嘴冲蚀磨损机理研究
11.
Fluid-structure Interaction Mechanism and Numerical Simulation of Elbow Erosion Failure
弯管冲蚀失效流固耦合机理及数值模拟
12.
Mechanism for Pulsed Anodizing of Titanium Alloy and Resistance of the Anodizing Coating to Galvanic Corrosion
钛合金脉冲阳极氧化膜抗电偶腐蚀性能及机理
13.
Research of the Influence of Component、Microstructure and Impact Energy on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
成分、组织及冲击功对湿磨衬板用钢冲击腐蚀磨损机理影响的研究
14.
Study on Impact Corrosion and Abrasion Mechanism of Low Carbon Alloy Steel for Liner Under Different Impact Energy
不同冲击功下衬板用低碳合金钢冲击腐蚀磨损机理的研究
15.
Influence of Component and Microstructure on the Impact Corrosion and Wear Properties and Mechanism of Steels;
成分与组织对钢的冲击腐蚀磨损特性与机制的影响及其机理研究
16.
A Coupled Theoretical Model of the Mechanism of Ultrashort Laser Ablation of Dielectrics
超短脉冲激光烧蚀绝缘体材料机理的耦合理论模型
17.
Mechanism Analysis of the Pulsed Electrochemical Machining(PECM),Polishing(EP) and Micromachining(EMM) Based on a Capacity Model
基于电容模型的脉冲电解、电化学光整、蚀刻加工机理分析
18.
Development of New Ceramic Nozzles and Study on Its Erosion Wear Mechanisms;
新型陶瓷喷砂嘴的研究开发及其冲蚀磨损机理研究